User Manual

READY TO USE

DryConn

VisiLock

with SmartGel

50100-56 REV F 03/16

Features and Benefits

• Waterproof and corrosion proof

• Pre-filled with a non-toxic gel that eliminates hazmat requirements

• Re-enterable, semi-transparent, encapsulated splice box allows for visible splice examination

• Includes mounting tabs to securely attach housing to structures

• Locking mechanism centers splice in box

• One piece for fast, easy installation

• No need to abrade cable during installation

• No assembly or set-up time required

• No shelf life issues with SmartGel

• Eliminates heat shrinks, primers, tapes, and epoxy packs

• Amperage not to exceed maximum temperature of the conductor

• Designed to protect cathodic splices from corrosion

• For use in outdoor or direct-burial locations

• For making tap or branch splices on insulated cables rated up to 100V

• Compatible with immersion in 10% chlorine solution

• Compatible with immersion in 5% salt solution

Eliminate these time-consuming steps:

• Two-part epoxy mixing and messy pouring methods

• Ambient temperature issues with epoxy splice methods

• Assembly and set-up time

• Hazmat requirements with transporting materials

• Heat shrinks, primers, tapes, and epoxy packs

Product Data and Testing Information:

• Gel is a cross-linked silicone polymer

• Tests Conducted:

1. 500 Hour Salt Fog

2. Immersion / Heating / Cooling Sequence:

- 24 hour water immersion  72 hours at 75°C  24 hours water immersion

 4 hours at 

18°C  24 hours water immersion

3. 30 minute water submersion at 6 feet followed by dielectric at 1000VAC

4. Impact at ambient and following 168 hours at 100°C. 4 hour water immersion

following impact.

NOTE: Dielectric at 1,000VAC and Insulation Resistance at 250VDC conducted

following all 24 hour immersions.

Made in USA of US and Foreign Parts.

U.S. Patent 7,384,297 and 7,431,611. All other trademarks,