User Manual
Anode Splice Box
Catalog # Selling Unit Case Pack
98010 1 pc box 12
DryConn
®
VisiLock
®
with SmartGel
®
Installation Instructions
Max. Voltage: 100V
Temperature Rating: -40° - 90°C (194°F)
Wire Range: Main: #8 - 1/0 (.363” - .625” O.D.)
Tap: #12 - #4 (.305” - .443” O.D.)
Product Specifications and Measurements
1. Install electrical connection per connector
manufacturer’s instructions.
2. Lay main conductor into conductor
cradles centering electrical connector as
shown in Figure A.
3. Position Tap conductor as shown in
Figure A. Note: Tap conductor can be
positioned to exit either side of housing.
4. Install wire ties tightly around main
conductor. Cut remaining length of wire
tie and discard.
5. Close housing verifying it is securely
latched.
Figure A
Measurements (Inches/Centimeters)
A - 1.65/4.19 B - 3.37/8.56 C - 0.99/2.51
D - 7.04/17.88 E - 0.25/0.64 F - 6.75/17.15
G - 1.81/4.60
B
A
C
6.69
1.81
Ă
.25
7.011
G
F
E
D
Important Notice:
All of the statements, technical information, draw-
ings, illustrations, and instructions related to King
Innovation’s products are based on information under-
stood as reliable and correct to the best of the com-
pany’s knowledge. Prior to product usage, independent
evaluation is recommended to evaluate and determine
if it is suitable for the proposed application. All risks
and liability are assumed by the independent user. Any
assertion associated to the product which is not out-
lined in King Innovation’s current publications, or any
dissimilar assertion contained on individual purchase
orders shall have no force or effect unless explicitly
arranged, in writing, by an authorized officer of King
Innovation. King Innovation’s liability for these products
is set forth in our standard terms and conditions of sale.
King Innovation is a registered trademark.
WATERPROOF CONNECTIONS