Instructions / Assembly

Mini-Torch
SKU # Description Selling Unit
43010 Mini-Torch Card of 1
Perfect for use with heat shrink wire connectors
PRODUCT SPECIFICATIONS
Size: 5.8”h x 4.3”l x 2.40”w
Weight: 5.29oz
Fuel: Butane
Gas Container Capacity: 0.85oz
Operating Time: 30-40 minutes
Approximate Temperature: Up to 1300°C (2372°F)
(blue flame)
FEATURES
• Perfect for use with heat shrink style wire connectors
• Uses butane gas (not included)
• Quick light torch with easily adjustable continuous
flame
• Compact size for portability
• Includes soldering attachment
WARNINGS/SAFETY HINTS
• Keep out of reach of children
• Verify child safety switch is engaged when not in use
• Do not use torch if it shows any damage; do not puncture
• Ignite lighter away from face and clothing
• Avoid contact with skin and eyes; always wear protective eye
equipment and gloves while operating torch
• Avoid breathing welding/soldering fumes
• Do not direct flame towards a person
• Do not put down an ignited torch
• Flame visibility limited in direct sunlight
• Do not attempt to adapt or modify factory construction; do not
attempt repair on a damaged torch
• Do not work in an enclosed space; maintain proper ventilation
• Work only in a clean place, away from combustible or greased
materials
• Keep fire extinguisher in work area at all times
• Do not expose to heat above 49°C (120°F) or direct flame
• Do not puncture or incinerate or store in temperatures over 40°C
(104°F) or in direct sunlight
50100-96 REV B 07/15
MADE IN TAIWAN
Mini-Torch
CPSC
0085
1. Trigger
2. Child Safety Switch
3. Flow Control Adjuster
4. Air Adjustment Ring
5. Continuous Flame Switch
6. Refilling Valve (on the bottom)
INSTRUCTIONS FOR USE:
Read all instructions before using torch; keep this
packaging for future reference. Do not use torch if
it is leaking. In the case of leakage, transport torch
outside to a place with good air circulation and
without ignition source. Operate torch in a well-
ventilated area far from any possible source of
ignition, sparks, open flames, pilot lights, electrical
cookware, and away from other persons. Be sure
to observe all safety instructions and warnings
prior to use.
REFILLING GAS:
King Innovation’s Mini-Torch does not contain any
butane gas when purchased. Warning: Refilling
gas by an inadequate method may lead to a seri-
ous accident/injury. Refill torch in a well-ventilated
area away from any source of ignition and away
from other persons. Do not smoke while replac-
ing or refilling the torch. Refill with triple refined
butane gas only.
1. Turn off torch and make sure the fire is fully
extinguished; let cool at least five (5) minutes
before filling the cylinder.
2. Close all taps, valves and adjusted knobs of
the torch prior to refill.
3. Place the torch in an upside down position.
4. Insert the nozzle of the butane canister into the
refilling valve.
5. Press down on the canister to release the gas.
6. Once the gas begins to overflow (seep out
around the edge of the nozzle) the torch is full
and you should remove the can.
IGNITION AND EXTINGUISHING:
1. Rotate the Air Adjustment Ring to fully expose
the air holes.
2. Press the Child Safety Switch to release; then
push the Trigger to automatically ignite the
torch.
3. After ignition, slide the Continuous Flame
Switch to the right to keep a continuous flame.
4. Sliding the Continuous Flame Switch to the left
will extinguish the flame.
FLAME ADJUSTMENT:
1. Turn the Flow Control Adjuster to “+” or “-” to
adjust the flame length.
2. Rotate the Air Adjustment Ring to change the
flame setting.
Do not attempt to modify or adjust the factory
made Mini-Torch. Physical harm can result from
modification, adjustments and/or tampering with
the construction. Do not attempt to remove any
parts or components other than those instructed.
DANGER- EXTREMELY FLAMMABLE
WARNING- CONTENTS UNDER PRESSURE