Cut Sheet

SHIP WEIGHT lbsDESCRIPTIONADD SUFFIX
-A
Almond Color
-I 6.0Interior and Grill Only (no wall can)
Options / Accessories
SHIP WEIGHT lbsDESCRIPTIONMODEL
3.5
2.0
Ceiling Recess Can
Grill - White
UPC
WHIC-C
WHFG
12650
12520
WATTS SHIP WEIGHT lbsMODEL
WHFC2010
WHFC2015
WHFC1210
WHFC1215
8 lbs
8 lbs
8 lbs
8 lbs
VOLTS
120
208
208
120
750 • 1500
750 • 1500
500 • 1000
500 • 1000
AMPS
4.2-8.4
Ordering Information *Add suffix -W for White Grill or -A for Almond Grill color
6.3-12.5
2.4-4.8
3.6-7.2
120V
208V
*Dual rated heaters will draw 13% less amps and 25% less wattage when operated at 208V.
-H 5.0Heat Box Only (no wall can)
WHFC2410
WHFC2415
8 lbs
8 lbs
240/208*
240/208* 750 • 1500
500 • 1000
2.1-4.2
3.1-6.3
240V
Engineering Specifications
Ceiling HeaterWHFC Series
A: Series
B: 12 - 120V 20 - 208V 24 - 240V
C: Watts (500 to 1500)
WHFC
A
12
B
10
C
The WHFC Ceiling Heater
This value-priced ceiling heater provides all of the features offered by the original WHF but adds the benefits of a ceiling mounted design.
Its extreme value comes from combining the rapid heat transfer of a NiChrome element with the performance of a squirrel cage blower.
Contractor shall supply and install WHFC Series ceiling-mounted forced-air electric heaters manufactured by King Electrical Mfg. Company.
Heaters shall be of the wattage and voltage as indicated on the plans.
Ratings: Heaters shall be available in wattages of 500 to 1,500 at 120,
208, or 240 Volts.
Blower and Motor: A tangential cylindrical blower, delivering 70 CFM,
shall be driven by a shaded pole, permanently lubricated, C-frame type
motor with impedance protection and sealed bearings. Motors shall be
the same voltage as the heater. The motor and all wiring shall be totally
isolated from the heating chamber for protection from heated air.
Elements: Element assemblies shall be constructed of coiled Nickel
Chromium alloy, corrosion resistant wire strung through a minimum
of four rows of mica insulator. Element assemblies shall have factory
provided connection to allow field modification to 50% wattage at time
of installation.
Thermal Overload: Heaters shall be equipped with King’s patented
thermal overload Smart Limit Protection
®, which disconnects
elements and motor in the event normal operating temperatures
are exceeded. If thermal overload trips due to abnormal operating
temperatures, thermal overload shall remain open until manually reset
by turning the heater off for 15 minutes. Automatic reset of thermal
overloads, which allow the element to continue to cycle under
abnormal conditions, will not be accepted.
U.S. PATENT #6,748,163 B2 •
CIPO PATENT #2,393,882
Ceiling Surface Can: The can shall be 20 gauge electrogalvanized
steel and shall contain knockouts. The can shall be provided with a
depth gauge, extending the full length of the can. The can shall be
supplied with a factory installed groundwire.
Grill: The grill shall be a louvered, one-piece design with rounded
edges on all four sides, with rounded corners to prevent snags from
contact with other materials. The grill shall be epoxy powder-coated
in the color specified by manufacturer.
Approvals: cULus (E41422)
4.0T-Bar PanelWHFC T-Bar Panel 12133
Nichrome open-coil element
C-Frame motor
Squirrel cage blower
Patented Smart Limit Protection
®
Whisper quiet
Ceiling mount
Dual wattage
Recess can with QuickSet
™
stops
Powder coated grill
Standard color: white (almond optional)
3 -year limited warranty
-W White Color
4.0Surface Can - WhiteWHSC-C-W 12230
31
-DS15 8.0Factory Installed Double Pole Disconnect (10A/ 240V / 15A/120V)