Cut Sheet

Baseboard HeaterK Series
A: Length
B: Series
C: Volts
D: Watts (375 to 2400)
E: Color (BW) Bright White (A) Almond
F: -HAL (High Altitude Limit)
4
A
K
B
24
C
10
D E
-BW
Engineering Specifications
The K Series Baseboard Heater
Baseboard heaters are an economical way to provide heat. They are typically used in apartment construction and other rental
properties because of low initial cost and maintenance. Quality components guarantee a long-lasting, reliable heater. Standard color
is bright white. Almond color available. Institutional grade 18 gauge front covers and 22 gauge back cans are available for special
applications. All other specifications are the same as the standard heater.
Contractor shall supply and install K Series electric convection baseboard heaters manufactured by King Electrical Mfg. Company
of the wattage, voltage and length indicated on the plans.
Construction:
• The heater shall take room air in the bottom (lower front) and discharge
it through the top front.
• The heater back, bottom, and top shall be fabricated from electro-galvanized
22 gauge steel. Front panels shall be fabricated from 22 gauge
electro-galvanized steel, ribbed longitudinally for extra strength and have
center support to resist impact loads.
• The heater casing shall have modern rounded ends and corners to provide
a smooth appearance, finished with a baked enamel.
• The heater shall be provided with a continuous capillary sensor tube
for thermal protection, extending the full length of the heating element,
rated at 175º F, and be a fail-safe type.
• The heater shall have a 44 cubic inch junction box at both ends,
furnished with five ½" knockouts located on the back, bottom, and side.
• Heater elements shall consist of high quality 80% Nickel and 20%
Chromium alloy corrosion-resistant wire completely surrounded by
Magnesium Oxide and enclosed in a rust-resistant sheath. Ribbon
aluminum finning shall be compression welded to the sheathed element
to provide chimney-type flue for heat transfer.
• Heaters shall be supplied with a one year limited warranty.
Rating and Approval:
• The heaters shall be available in ratings from 375 through 1,500
Watts at 120 Volts, and 375 to 2,400 Watts at 208-240 and 277 Volts.
• The heaters shall be available in 187 or 250 Watts per lineal foot.
• cULus (E29778)
Back wire design
Built-in clamps coming soon
Baked enamel finish
Dent resistant die form cover
Aluminum ribbon fin element
Full length safety cutout
Crushproof element
Natural convection heat
120, 208, 240 or 277 volts
Standard color: bright white
(optional almond color)
1-year limited warranty
Dimensional Data
F
-HAL
36
Standard Backwire Junction Box