Instructions / Assembly

3
Rev 4.14.22
NOTE: Ensure that building materials with a low heat tolerance (i.e, awnings, fabrics, plascs, sprinklers, insulaon,
etc.) are protected against degradaon. This may require the heater to be mounted at a distance in excess of the
published clearances to combusbles. Contact the material manufacturer for specic details of safe temperatures.
|--------Side--------| Min. Mtg.
Mounng Angle Front Behind End Top Below Height
0° 1'7" 1'7" 1'7" 9.4" 7'9" 7'9"
45° 3'3" 6.5" 1'7" 1'7" 7'9" 7'9"
Minimum Clearances to Combusbles in Inches
Clearances to Combusbles Figure 1
TOP VIEW
0° Mounng Angle
END VIEW
45° Mounng Angle
END VIEW
0° Mounng Angle