Instructions / Assembly

Instant Pop Up Canopy Side Wall
Instructions
King Canopy Brand Products • PIC America, Ltd.
1730 Five Points Lane • Fuquay-Varina, NC 27526
1-800-800-6296 • www.kingcanopy.com
After you have attached the cover to your instant canopy
frame and it is locked in the fully extended position your
side walls can be attached.
1
2
3
4
5
6
Before raising the canopy to an extended height fold up
the two adjacent corners of the cover to reveal the inside
perimeter Velcro strip.
Holding the sidewall, fold of the top edge of the wall so
that the Velcro will match up with the Velcro strip sewn to
the cover. Attach the Velcro strip along the top edge of the
cover aligning the zipper to the outside corner of the leg.
Repeat this process until all walls are attached.
Next secure the Velcro strips around each corresponding
leg and zipper the two walls together. On the DuraLite
unit - the walls do not zipper at the corners, the zippers
are centered in the 4 openings and attach to the legs with
the straps sewn on the inside of the side walls.
Your side wall kit comes equipped with zippered walls for
easy entry and exit.
The side walls can be fully opened by velcroing them
back and fastening them around the legs with the straps
sewn into the walls.