Instructions / Assembly

SIDE WALL ASSEMBLY
Step 1
Unfold each of the walls.
 • Thebackwallandfrontwall
 • The2sidewalls
Step 2
Findthehook&loopfasteningstripsononelengthoftherstsidewalltobeassembled.Thesestripsareto
beplacedonthetoppipeofyourcanopystructurebywrappingthefasteningstripsovertheperimeterpoles.
Repeatwithsecondsidewall,rearwallandfrontwall.
NOW, CONNECT THE LEG POLES TO THE ROOF ASSEMBLY WITH THE COVER ALREADY POSITIONED ON
TOP OF THE UNIT.
Step A: Firstinsertthepipesforthemiddlepolesintothe3-and4-wayconnectors,andthenconnecttheend
legpipesinthesameway.(Seeillustration)
Step B: Pushtheeightfootpadsontothebottomofeachleg.
NOTE:thefootpadsareNOTforanchoringthecanopy!
Step C: Connectthehook&loopfasteningstripsdownthelengthofeachleg.
Step 3
Afterconnectingthetopofthesidewallsandinstallingthelegpipesintotheconnectorsontheperimeterof
theunit,useelasticballstrapstoconnecttheendofeachsidewalltothe4cornersoftheunit.
Start at Peak
Attach Left to Right
Insert Second
Insert First
InsideViewofHook
andLoopFasteners