Instructions / Assembly

LEGS ASSEMBLY
NOW, CONNECT THE LEG POLES TO THE ROOF ASSEMBLY WITH THE COVER ALREADY POSITIONED ON
TOP OF THE UNIT.
Step A: First insert the pipes for the middle poles into the 3- and 4-way connectors, and then connect the
end leg pipes in the same way. (See illustration)
Step B: Push the foot pads onto the bottom of each leg.
NOTE: The foot pads are NOT for anchoring the canopy!
IMPORTANT! Once the legs and cover are assembled, your canopy will act like a kite in the wind. It is
imperative that the canopy anchors be installed NOW!
insert rst
insert second