Installation Guide

FRAME ASSEMBLY

1. Arrange all pipes and ttings on the ground as in Figure #1 below.

2. Starting with the center peak 4-way tting (TOP4WPC) connect all 4 pipe sections (6X6PC & 2X9PC) that

form the center peak into the center peak 4-way tting (TOP4WPC). Figure #2 below.

3. Starting at one corner, attach a 4-way corner tting (4WCPC) and proceed to assemble the perimeter

of the canopy with the 6X6PC, 6X6PC-SW and remaining 4WCPC ttings (see gure #3 below). When

completed, the frame should look like the one in gure #4 below.

4. Place the cover over the frame and temporarily secure at the corners as shown in gure #5.

Figure #1

Figure #2

4WCPC

4WCPC6X6PC

6X6PC

2X9PC

6X6PC 6X6PC

TOP4WPC

Figure #3

Figure #4

Figure #5

TOP4WPC

6X6PC

4WCPC

6X6PC

6X6PC-SW

2X9PC

6X6PC-SW