Instructions / Assembly

To complete your canopy, secure the top down
each side on the bottom pipe and around each end
with ball straps. (See Diagram N)
Add the canopy endwalls using the Velcro straps
and then secure them using the ball straps. Next,
tighten and secure the drawstrings at each corner
foot. You have successfully set up your canopy (See
Diagram O). Now that the canopy is set up, you may
remove the ropes used for assembly.
NOTE: Your canopy sidewalls and rear endwall are
long enough to be buried in the ground. This will help
prevent water from running inside. (See Diagram P)
Diagram N
Diagram O
Diagram P
11.
13.
12.
COVER & LEGS ASSEMBLY