Instructions / Assembly

Once you have secured top to curved section of frame, you

may now nish frame assembly. Assemble the remaining

frame on each side using the 33.5´´ pipe, foot sections,

and 58´´ pipe as shown in Diagram K. Make sure hooks on

the feet are on the inside of frame. Push in on leg sections

and make sure the legs are securely set on ground before

assembling nal side and standing canopy up. This will keep

the canopy from sliding.

Now that you have completed the frame assembly and your

canopy is standing, take the cables provided and hook one

end to each foot (See Diagram L) over to the foot on the

opposite side. You may have to push out or pull in to get

cables hooked. Make sure cables are tight across. These

cables keep the canopy frame with the designed curved

shape.

(NOTE: Be careful NOT to trip over cables.)

Diagram K

Diagram L

With the canopy standing and cables in place, anchor

the canopy using the foot stakes provided (See

Diagram M). Driving the stakes in at an angle will help

anchor the canopy more securely. Once stakes are in

place, you may remove the cables.

SEE “ANCHORING YOUR CANOPY”

Diagram M

10.

COVER & LEGS ASSEMBLY