Instructions / Assembly

COVER & LEGS ASSEMBLY

Remove cover from plastic bag and unfold.

Next fold half the cover over the other half

with the white side out. Match the corners

(See Diagram F) and mark the top center of

cover at the grommet line at both ends. (See

Diagram G).

Once centers have been marked at both ends, pull cover over

frame with white side down. (See Diagram H) Position the

center mark with the top center pipe of frame. (See Diagram I)

Attach cover to each end of top curved frame by running ball

strap through grommet hole, around pipe and hook back over

ball. (See Diagrams J and K)

Diagram K

Diagram G

Diagram H

Diagram I

Diagram J

Diagram F