Instructions / Assembly

FRAME ASSEMBLY
After assembling the rst full length section of
roof, (See Diagram C-1) use the rope enclosed
to hold frame together by tying frame from
end to end down the center (See Diagram
C-2).
Continue assembly by completing the next curved
section on each side of the top section. (See Diagram
D) Hold frame together by tying frame from end to
end at the bottom of this section as in Diagram C-1
above.
NOTE: Push frame inward from each side to keep
curve shape.
Once you have completely assembled all curved sections
of the canopy, (See Diagram E) you are now ready to
put the cover on. Put cover on before assembling the
last section with feet. See next step.
Diagram C-1
Diagram C-2
Diagram D
Diagram E
3.
5.
4.