Instructions / Assembly

ANCHORING YOUR UNIT
This canopy is designed for use as a temporary structure. After assembly, the canopy MUST BE securely
anchored to the ground to prevent damage from winds. Your canopy will act like a kite in the wind if not
properly and securely anchored to the ground. Severe winds will cause the frame to twist and unanchored
legs will fall, thereby collapsing the canopy. If severe winds are expected, you must remove the cover from
the frame to prevent damage.
We recommend anchoring your canopy at each corner foot
and center foot on each side. Screw anchor into ground
next to canopy foot using a large screw driver (1). Tilting the
anchor slightly will help the anchor to cut into the ground.
Apply downward pressure while turning the anchor into the
ground. Leave approximately three inches of anchor out of
the ground.
Tie Rope (2) around the pipe, and then back through the anchor
eye. Pull as tight as possible and secure. Anchor kits available
online at www.kingcanopy.com or call customer service at
1-800-800-6296 and ask about purchasing our 6-peice anchor
kit, item #A6200. ANCHOR KIT SOLD SEPARATELY
(1)
ANCHORS ARE NOT INCLUDED
(2)