Instructions / Assembly

ROOF FRAME ASSEMBLY
1- Start assembly with top frame as shown
in Diagram A. The 47 inch pipes are
used for the roof rafters and 47 & 38 inch
pipes form the length of frame. Start
assembly with center peak as circled
in Diagram A. 1.75 inch Bolts are included
to bolt the pipes together for
additional strength.
Diagram B
Diagram C
47 Inch Pipe
47 Inch Pipe
2- Once you have assembled the roof frame,
insert the legs on one side using the 47 inch &
25 Inch pipes with the foot pads installed.
1.75 inch Bolts are included to bolt the pipes
together for additional strength.
47 Inch Pipe
3- With the top frame laying over on one side
and the legs inserted on the other side as seen in
Diagram B, drape the one piece cover with
sides and rear wall over the frame.
Make sure you have the open end in
the direction needed. Pull the one side
down over the frame with the legs
inserted. You can also pull the rear
over the frame partially. Next, insert
the legs on the opposite side and pull the
remainder of the cover on.
Foot Pad
Front
Side
38 Inch Pipe
25 Inch Pipe
Diagram A
Bolts