Instructions / Assembly

12) Now that all the ball straps are
attached. Insert the pipe into each plastic
foot pad and begin to attach the legs
to the frame. Place each leg next to the
three and four way ttings.
13) Slide a c-clip on to each corner leg
before inserting them into the 3-way
ttings.
14) Starting with the two outside legs
grab the base of the 3-way corner tting.
Lift the frame and insert the leg into the
open 3-Way tting. Next insert the center
leg.
15) Repeat step on other side until the
entire unit is standing upright.
LEG ASSEMBLY
Insert First
Insert First
Insert Second