Instructions / Assembly

FRAME ASSEMBLY

Start by laying out all of the parts and pieces to your King Canopy. Please refer to the

parts list to ensure that your kit is complete. When all the parts have been accounted

for, begin to layout the perimeter of your frame according to the photo above (6X6PC &

5X8PC). Each 3-way tting (3WPC) should be placed at all four corners and two end peaks.

The 4-Way ttings (4WPC) are placed at the center leg and roof sections.

5X8PC

3WPC

3WPC 3WPC

3WPC

6X6PC

4WPC

2) Now that all the pipe and ttings are

laid out as displayed in the photo, begin

to connect the center pipe and ttings.

Start assembly by working from one end

to the other, connecting the center ridge

pipe into the 3-Way (3WPC) and 4-Way

(4WPC) ttings.

3) Once the center frame work is fully

connected start assembling the left and

right sections of the frame. Starting at

one end, begin to connect the 5x8PC

pipe to the assembled center ridge. Next

connect the corner 3-Way & 4-Way ttings

to the perimeter 6X6PC pipe.

6X6PC