User's Manual

1110
BEFORE YOU START BEFORE YOU START
Setting the Date and Time
1.
2.
3.
When the monitor is off, press “SET” button shortly, it will display the date format.
Then press “SET” or “MEM” button to switch the date format.
Then press the “START/STOP” button to confirm the date format, and the year
will flash. Press the “MEM” or “SET” button to change the year. Each press will
increase the numeral by one in a cycling manner.
It is important to set the date and time before using your blood
pressure monitor for the first time, so that a correct time stamp can be
assigned to each record that is stored in the memory.
(The setting range of the year: 2021—2050, Time format: 24H / 12H)
Press and hold the “MEM” button to quickly advance the years.
Press and hold the “SET” button to quickly go backwards through the years.
Press “START/STOP” button to confirm the year, then the month will flash.
Repeat the same steps to change the month, day, time format, hour, and
minute.
CAUTION
Replace the batteries whenever the below happens
The shows.
The display is dim.
The display does not light up.
Do not use new and used batteries together.
Do not use different types of batteries together.
Do not dispose the batteries in fire. Batteries may explode or leak.
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
• Open the battery cover.
• Install the batteries as indicated in
the battery compartment.
• Replace the battery cover.
Installing and Replacing the Batteries
(Always select the
authorised / specified
battery: Four AAA-size
batteries).