User's Manual

Recall the Records
1.
2.
When the monitor is off, press the “MEM” button,
the lastest record will display.
The most recent record (1) is shown first. Each new measurement is
assigned to the first (1) record. All other records are pushed back one
digit (e.g., 2 becomes 3, and so on), and the last record (90) is dropped.
The current number
is No 2.
The corresponding
time is 8:07.
The corresponding
date is January 1st.
CAUTION
The date and time
of the record
will be shown
alternately.
Press “SET” or “MEN” button to find the record you want.
1716
DATA MANAGEMENTDATA MANAGEMENT
If you did not get the correct measurement, you can delete one
record or all records by following steps below.
Delete the Records
1.
3. If you do wish to delete this reading,
then press the "START/STOP" button
when the screen is flashing "dEL YES".
This reading will disappear and the LCD
will display "dEL donE".
Press the “MEM” button to enter the
memory mode, then press the “MEM” or
“SET” buton to find the record you want to
delete. Then hold and press “START/STOP”
button for about 3 seconds, the LCD will
display and flash “dEL yES”.
Delete one record:
2. Press the 'SET' or 'MEM' button to
toggle between deleting this reading (dEL
YES) or not (dEL no).