Operation Manual

MAVO LF Operation Manual（KineOS 6.2）
©2019 Kinefinity Inc. Page 9 / 62
1.3 Interface and Parameters
Once the camera is powered on, it enters into the Liveview mode right away: parameters of current scene are
displayed on the top and bottom. Press [WheelCentral Button] to show/hide Waveform.
#
Name
#
Name
1
Display Mode: Liveview/Playback/REC
11
Highlight Stops
2
Image Format
12
ND Value (only with e-ND adapter)
3
Record Resolution
13
Clip Name
4
CMOS Imaging Sensor FPS
14
SSD Status/Capacity
5
Shutter Speed/Shutter Angle
15
Record Format/Codec
6
Iris Number (If Applicable)
16
Time Code
7
Monitoring LUT
17
Real-time Power Voltage
8
Color Temperature
18
Real-time Core Temperature
9
Exposure Mode
19
VU meter
10
ISO/EI ASA
20
Waveform
NOTE CMOS Imaging Sensor FPS is the actual capturing FPS of the sensor, set by shortcut button [2]
and [Wheel]; Project FPS is the playback FPS of the footage in post work, set by [Configuration].
NOTE EF Iris control is only for lenses in the White list; other lenses might not be recognized or
controlled.