Operation Manual

MAVO LF Operation Manual（KineOS 6.2）
©2019 Kinefinity Inc. Page 8 / 62
1.2 Functions of Buttons
Under Liveview Mode, set the parameters by shortcut button [1-4] and the [Wheel]; under Playback Mode,
select and switch between clips by shortcut button [1-4].
Operation
Function
Note
Rotate the Wheel
Iris
Control/Select
Only for Lenses in White List
Central Button
Switch Displays
Display with core parameters ->
Display with Waveform , or Confirm
Button 2 Once
ISO/EI
Set ISO/EI Value
Button 3 Once
ND
Set ND (only with e-ND adapter)
Button 1 Once
Shutter
Shutter Angle or Speed
Button 4 Once
Color Temp
Set Complete List by menu
Button 2 Twice
FPS
Shooting (Sensor) FPS different from
Project FPS
Button 3 Twice
LUT
Choose LUT (with e-ND adapter)
Button 1 Twice
Preset List
Also play footage under Playback or
cancel operation
Button 4 Twice
Resolution
Set the resolution under the format
Buttons and wheel on SideGrip are basically the same as on the body, functions:
Button
Function
Note
REC
REC; Switch from Playback to Liveview
<
Preset List
Also play footage under Playback or
cancel operation
Zoom
Switch between 1:1/1:2/1:8, or disable
the zoom in menu; press for 3 seconds
to enter/quit lock mode
Playback Mode
Configuration Menu
Also play footage under Playback mode
Volume
Press twice to set audio
Sleep Mode
Only on SideGrip, low-power standby
mode
SSD Button
Activate, deactivate or format SSD
Power on/off
Press twice to power off; press for 5 sec
+ to power off compulsorily
NOTE SSD Button is only on camera body; Sleep Mode Button is only on SideGrip. [Multifuction
WheelUp] on SideGrip equals [Button 1]; [Multifuction WheelLeft] to [Button 2]; [Multifuction
WheelRight] to [Button 3] and [Multifuction WheelDown] to [Button 4].