Operation Manual

MAVO LF Operation Manual（KineOS 6.2）

12. Black screen after upgrading failure:

Please try to enter into Calibration Mode: hold configuration button when press and release power

button, after three seconds, release configuration button. You can also upgrade the firmware under

this mode. But if you can not enter into calibration mode, please contact us by sales@kinefinity.com,

or contact your local dealer.

13. Recover the footage due to power failure:

Power failure during shooting may damage the currect footage, and footage can not be played back

in camera or computer. For ProRes footage, please use the method below. Please work in Windows

and that Quicktime 7 is installed. Download KineRecovery.zip to your PC, and then:

1. Copy files: unzip the file and copy KineRecovery.exe and QTCF.dll to the folder of footage, like PRJ-

0002-003-A2_5D8A;

2. Run: run the KineRecovery.exe to start the recovery;

3. Complete: the recovered mov file will be generated in the footage folder, name starting with “r”.