Operation Manual

MAVO LF Operation Manual（KineOS 6.2）

3.8 Control Cameras with iPad (KineRemote)

If the camera is configured with WIFI option, you can use iPad (iOS 10 or

below) to control the camera.

Current KineRemote APP is only available in App Store (New APP might be

launched in later 2019), search Kinefinity or KineRemote, then download and

install.

Turn on WIFI: [ConfigurationSettingsWIFI Power: On].

How to use KineRemote:

1. Set camera: Plug in Antenna to WIFI socket, and turn on the camera.

A wireless hotspot (AP) will be generated by camera automatically

such as kinefinity_5D8A, 5D8A stands for the first four digits of the

camera serial number.

2. Set iPad: Run KineRemote App installed on iPad: [SettingWIFI], and

choose to connect kinefinity_5D8A.

3. Open the APP: open the KineRemote, if you see the Timecode running,

it means you have successfully connected the camera to your iPad.

You can directly modify a parameter in KineRemote App by finger tap. For

example, to changes shutter, tap shutter Angle to pop up shutter setting list,

tap the Up or Down button with your finger to desired value, and click blank

space to confirm and exit.

NOTE LOOK is for Iris if attached an EF lens.

NOTE You need close the KineRemote in background when KineRemote

does not show parameter properly. Then open it again.

Menu Operation

Turn on WIFI

[ConfigurationSettings

WIFI Power: On]