Operation Manual

MAVO LF Operation Manual（KineOS 6.2）

3.7 Configure Camera

You can save settings to the camera: preset list, body fan speed, EI/ISO

mode, shutter mode, etc. When power on with USB disk, the camera will do

factory reset.

3.7.1 Preset

In-Camera Presets are a set of parameters for recording and shooting:

Image Format; Resolution; FPS; Shutter Speed; Record Format

Moreover, there are eight in-camera presets, and it provides quick switch for

these presets: press shortcut button [1] twice to pop up the Preset list.

Besides, customers can define and save these in-camera presets. After setting

these parameters in Liveview state, then:

[ConfigurationShootingSave as Preset]

You will find the preset you save on the list.

3.7.2 Shutter Display Mode

There are two modes for shutter display: Shutter Speed and Shutter Angle:

[ConfigurationLiveviewShutter Mode: Time/Angle]

Calculation between Speed and Angle, if Shutter Speed is 1/50s, and fps is

25, and then the shutter angle is:

25*360*(1/50) = 180 Degree.

The Shutter Angle ranges from 0.7~358 Degree; the Shutter Speed has min

value 1/2000, and the max value depends on the FPS.

Besides, Shutter Speed List does NOT match Shutter Angle List.

NOTE Set appropriate shutter speed to avoid flickering: for example,

1/50s, or 172.8 Degree.

Menu Operation

Change Presets

[ConfigurationShooting

Save as Preset]

Menu Operation

Change Shutter Display

[Configuration

LiveviewShutter Mode:

Time/Angle]