Operation Manual
MAVO LF Operation Manual（KineOS 6.2）
©2019 Kinefinity Inc. Page 27 / 62
3.4 Custom LUT
The camera supports custom LUT perfectly: from shooting to post with
custom LUT. There is one in-camera preset LUT: KC_NeutM. KC_NeutM has
more accurate highlight and details in shadow than Kine709 and covers
balanced tone with normal saturation and contrast.
You can upload a LUT to the camera, switch different LUT/Look instantly
when monitoring. While recording cDNG or ProRes with custom LUT; it does
not get burned into the footage: RAW is RAW, on-site LUT for monitoring is
dumped to clip folder, and can be used by the editor for a quick grade. You
can upload 3
rd
-party LUT to the camera as many as you want; supporting up
to 33x33x33 3D LUT Cube, SCRATCH and DaVinci Resolve can output cube
LUT.
3.4.1 Upload Custom LUT
It just needs three simple steps:
1. Output from DI software and rename it, rename the LUT into four
letters in English, like CAN1.cube;
2. Copy the LUT into root folder of USB stick as FAT/FAT32;
3. Upload to the camera: insert USB stick to USB port:
[ConfigurationLUTLoad Custom LUT]; it only takes one second.
Reboot the camera, and the new LUT will be shown in the LUT shortcut list if
press shortcut button [3].
NOTE The LUT will be overwritten, if the name is same, and there
should be no blank in the name and not more than four letters.
3.4.2 Erase Custom LUT
Erasing the uploaded custom LUT is also intuitive,
[ConfigurationLUTClean Custom LUT]
Then all custom LUT will be deleted in a second, and only native KC_NeutM
will be remained.
Menu Operation
Load Custom LUT
[ConfigurationLUT
Load Custom LUT]
Menu Operation
Erase custom LUT
[ConfigurationLUT
Clean Custom LUT]