Operation Manual

MAVO LF Operation Manual（KineOS 6.2）

3.2.3 Waveforms

Waveforms, zebra and histogram help cinematographers determine the

exposure of images. Waveform indicates the brightness of images over the

horizontal direction, while histogram shows the statistical information on the

brightness of whole image.

The Waveform matches the images by default, and shows the LUT NeutM,

too. Waveform will change according to the different LUT. You can also

choose to check the waveform without LUT by

[ConfigurationLiveviewWaveform]

You can choose different displays for waveforms and:

 LUT: The waveform information displays distribution of RGB, which is

based on RAW data after the processing of monitoring LUT loaded.

 LOG: The waveform information display R/G/B three color channels

distribution based on the RAW data with KineLOG.

NOTE When over 100% on the waveform of LUT, images do not mean

overexposure definitely, only over clipping line on waveform with

LOG, the images are sure to be overexposed.

Menu Operation

Switch between different

sources

[ConfigurationLiveview

Waveform]