Operation Manual

[TYPE HERE]
MAVO LF BRIEF INTRODUCTION
Kinefinity Inc. has been developing cinema cameras covering optical design to FPGA, circuits and software,
with assistance from filmmakers, broadcasting industry and academic schools.
The large format MAVO LF and MAVO S35 cameras are considered to be the flagship 6K cameras by
Kinefinity. MAVO LF, is the full frame camera of Kinefinity, 6K wide records up to 75fps and 4K wide up to
100fps, can either shoot ProRes or RAW.
 Full frame 3:2 6K CMOS imaging sensor;
 Dual native ISO: 5120/800, low noise level and high latitude image at both settings;
 ProRes: In-camera ProRes recording at full resolution, in-camera oversampling 6K to 4K/3K;
 Compressed RAW cDNG: The compression ratio of cDNG can be set to 3:1, 5:1, or 7:1, which is
supported by DaVinci Resolve for editing or grading;
 Compressed RAW KRW 2.0: It might be enabled in firmware in 2019;
 High frame rate: Up to 200fps@2K Wide; up to 150fps@3K Wide; up to 100fps@ 4K Wide;
 Low rolling effect: Fast sensor readout speed, barely suffer any rolling shutter effect ;
 14+ stops with KineLOG3: Preserve highlight and shadow perfectly, provide maximum room for
post;
 Custom LUT: Support third-party 3D LUT from shooting to post;
 2.5-inch 7mm professional KineMAG SSD as Record Media, compatible with consumer-type SSD;
 KineMOUNT (Interchangeable mounting system) supports PL/EF/Sony E Mount and even EF/PL
Mount with e-ND;
 Multiple monitoring outputs: Video port x2 and HD output x1 on the body; 3G SDI output X2
through KineBACK-W.
MAVO LF follows the very compact and modular body of TERRA/MAVO and shares most of the accessories
with the two cameras, suitable for both one-man job and film crew. ProRes codec enables fluent post
workflow. With professional ports, MAVO LF is a powerful cinema camera that offers amazing footages while
supporting an effective post workflow.