Operation Manual

MAVO LF Operation Manual（KineOS 6.2）

SSD File System Formats: NTFS & HFS

The camera supports both NTFS and HFS format for SSD. The default format is HFS, but for Windows

platform, you can set it to format in NTFS by:

[ConfigurationSettingsSSD File System] choose NTFS

Then reboot the camera and rebuild the SSD in camera, the file system of the SSD will be NTFS.

NOTE For Mac platform, you can still use NTFS: since MacOS 10.12 Sierra, MacOS can access NTFS files.

Do not write data or format SSD on Mac or Windows.

NOTE Rebuild/format the SSD in camera ONLY.

NOTE When the file system format of the camera is set to NTFS, the SSD of HFS can not be activated in

the camera. Here are two solutions for such situation: change the format of the camera into HFS

and then reboot to take effect; or back up your SSD on a computer, and then rebuild/format the

SSD in camera as NTFS. MAKE SURE to backup your clips before you format SSD.

NOTE If there is power failure accident while recording, the NTFS SSD may not be activated when the

camera is powered on again. Please back up your clips and then rebuild the SSD, or you have to

use another SSD to continue the shoot. While HFS SSD can be activated after powering the

camera, but the last clip may need to be recovered by special software in Windows.

NOTE To recover the cDNG/ProRes clip damaged by power failure, please refer to Chapter 4.13.