Operation Manual

MAVO LF Operation Manual（KineOS 6.2）

2.5 Record Media SSD

Please insert the KineMAG 500G/1T SSD or other 2.5" 7mm SSD to SSD slot before powering the camera. The

SSD slot has a secure latch: push the latch upwards before inserting or pulling out the KineMAG. The button

under the slot controls the operation of the SSD, and the LED indicator beneath the button shows the status

of the SSD.

Check the SSD status on the monitoring screens:

 Blinking red [No SSD]: the SSD indicator is off, which means that there is no SSD in the slot, you can

not shoot. Insert the SSD into the slot and reboot the camera;

 Blinking yellow [SSD: Ins]: the SSD indicator is red now, which means that there is a SSD detected but

hasn't been activated, you still can't shoot under this status. You need to:

 Activate the SSD: press [SSD] button, and choose [SSD Maintenance  Activate] or twice-

quick press on SSD button; if the SSD has been formatted into HFS or NTFS, it will be

activated successfully showing SSD capacity and green [SSD: Act].

 Rebuild SSD: if fail to activate SSD, please rebuild it in camera. Press [SSD] button, choose

[SSD Maintenance  Rebuild]. Then activate SSD, SSD status displays green [SSD: Act.

 Green [SSD: Act] with SSD available capacity and total capacity: SSD indicator is Green which means

the SSD is ready for shooting and the clips will be recorded onto it.

Please make sure that the SSD is deactivated before taken out: press SSD button, [SSD Maintenance 

Deactivate] or press the SSD button twice, SSD status turns into [SSD: Ins], then push the latch upwards and

pull out the SSD.

CAUTION Data can't be recovered after the SSD is rebuilt/formatted; please backup all data before

formatting.

CAUTION Due to the protrusion on case of Samsung 860 Pro, the door of SSD slot may be damaged when

taking this SSD from the slot.

NOTE Please insert the SSD before the camera is powered on, or the SSD will not be detected.

NOTE We only recommend KineMAG. Performance of 3

-partyon data spec are not guaranteed. No

technical support or help on recording issues such as frame drop or data loss for 3

-party SSD.

NOTE Please prepare backup SSD cards in case of emergency on the set.

NOTE If it shows red "Flush" during recording, please try a KineMAG. If the issue still exists, please