Operation Manual

MAVO LF Operation Manual（KineOS 6.2）

2.3 Lens

No matter if you attaching a DSLR still lens or PL cine lens, the camera employs a Lever-locking (Cine-style)

mounting system, rather than a DSLR camera mount.

Steps to attach EF lenses

1. Release: Rotate the locking ring of the EF mount clockwise, take off the cover and lens cover;

2. Install: Align the "red dot" on the lens with the "red dot" on the mounting adapter. Make sure that

the pin on mount engages with the hole in the mount of the lens. For EF-S lens, align the white

square on lens with the one on the mount.

3. Lock: Rotate locking ring (NOT lens) counter-clockwise (follow the arrow of "lock sign" on mount)

until it is fastened firmly.

CAUTION The mounting adapter might be burned if a lens/adapter with all-metal rear end is attached

directly to the camera body. In this case, please keep electronic iris control off:

[ConfigurationSettings Active MountDisable].

NOTE The following mount lenses with electronic contacts: Sigma18-35 T2.0 and Canon18-80 T4.0,

may show iris value on UI, but please do not change the value by the Wheel, or it will cause the

malfunction of the camera or the lens, we strongly recommend turning off the electronic iris

control. [ConfigurationSettings Active MountDisable].