Datasheet
87
Subject to technical alterations, as well as to changes of the design and the colour
conferencing
MEDIA CONTROL
PIXIE Pro NRC
The PIXIE Pro NRC cannot only control a projector or a display,
but also additional units, e.g. a DVD player or a satellite receiver,
integrated Audio systems, or even room technology, such as shades,
room lights etc.
Two ways of operating
The different media can be operated either via desk or wall panel or
via network and browser.
PIXIE Pro NRC operating panel Browser operating surface
Intuitive operation
Even complex operating procedures can be confi gured in a way that
they are automatically triggered off by pressing only one button.
Example: When switching on the projector, the screen, the ceiling lift and
the shades are automatically lowered, and the room light is dimmed.
Network
Several NRC systems can be joined in a network and installed in dif-
ferent rooms or buildings, so that they can be controlled from a centre
point.
Thus the operating hours of the lamps can be registered and and
maintenance can be arranged via e-mail.
Scheduler
The scheduler allows you to programme ahead: E.g., a unit can be
automatically switched on for a presentation and after a certain time
be switched off again, or the complete system can be automatically
switched off, e.g. for the night or for the weekend, and the projectors
or screens can be lifted.
Sensor inputs
At two inputs various elements can be connected (e.g. button / switch,
motion sensor, anti-theft sensor), which recongnize a movement and
start an action, e.g. starting a presentation via the button, or alarm
function etc.
Confi guration and control via a web browser
The PIXIE pro NRC is easy to confi gure. An assistant leads the user
intuitively and in seven steps through the complete confi guration and
programming. It is not necessary to write any text of the programme.
A few mouse clicks are enough to choose from the given menu
options, and the programming is done step by step. Finally the whole
confi guration is transferred via mouse click into the fl ash memory of
the NRC and the whole system can be tested immediately. It is also
possible to make changes or add further functions afterwards.
Optional accessories:
12 V relay
Control of a screen or a ceiling lift in 2-stop position via a media
control and a low voltage relay
. Power supply 12 V DC / 0.2 A
additionally required.
No. 5944000013
Motor control
Control of a screen or a ceiling lift in 2-stop position and random
stop in between via a media control and two low voltage relays
No. 5944000014
System accessories
RS 232 / IR control module
1 x RS 232 inter
face, 1 x IR transmitter (supplied)
Dim. 60 x 60 x 20 mm, weight 0.100 kg
No. 5670000010
IR-4 control module
4 x IR transmitter (supplied)
Dim. 60 x 60 x 20 mm, weight 0.100 kg
No. 5670000020
REL-4 control module
4 x relay output 24VDC / 1A
Dim. 60 x 60 x 20 mm, weight 0.100 kg
No. 5670000030
PIXIE Pro System Control
Operating panel for wall or desk installation
Dim. 210 x 115 x 35 mm
No. 5699000000
KINDERMANN PIXIE Pro NRC
Description
Central unit, network based media control
Ref. No. 5670000000
Connections
1 x RS 232 interface
1 x IR transmitter
1 x LAN RJ45
2 x SP bus RJ45
4 x relay outputs 24V DC / 1A with clamps
2 x digital inputs with clamps
4 adapters Gender changer D-SUB9 / HD15 for adapting
to RS 232
Power supply
Stabilized power supply
100 – 240 V AC / 12 V DC, 1.25A
Dimensions
38 x 105 x 38 mm
Weight
0.190 kg
Please note!
The KINDERMANN PIXIE Pro System Control is also available as stand-alone control unit for easy control of media technology via infrared.
For more infor
mation please see our website www.kindermann.com