Datasheet

Subject to technical alterations, as well as to changes of the design and the colour
57
installation
ACCESSORIES FOR CEILING LIFTS / MIRRORS
Accessories for KINDERMANN Ceiling lifts and ceiling mirror PRO
For KINDERMANN Ceiling lift Pro 120 and Compact 80/120
Illustration Item Description Ref. No.
Programming unit Standard
With 4-pin connection cable, for programming the stop positions, reusable
7466000100
Programming unit Electronic
For more convenience, with 4-pin connection cable, for programming the stop positions,
reusable
7466000101
Safety switch for lift Compact
Mechanical switch 230 V AC, 10 A, e.g. for cutting off the projector from power when
ceiling lift is lifted, stop position adjustable
746600015
Joint for lift Compact
With long spider arms. Required, e.g., for installing Sanyo PLC XP 100/200 or
Mitsubishi XL 6600
746600012
For KINDERMANN Ceiling lift Pro 250 with SMI motor
Illustration Item Description Ref. No.
Programming unit Standard for SMI motor
With 5-pin connection cable, for programming the stop positions,
reusable
7466000105
Programming unit for 4 positions with SMI
motor (up, 2 projector positions, lower
servicing position)
Consisting of SMI control unit, SMI interface, programming unit,
power supply 24 V DC, 1 A
7465000120
For all ceiling lifts / ceiling mirror Pro
Illustration Item Description Ref. No.
Up/down switch
10 A / 250 V AC, 2-pin, on wall mounting, Busch-Jaeger Refl ex Si, white
5944000002
Key switch
on-wall mounting
5944000001
Radio remote control
1-channel with wireless switch and mobile sender, up to 30 m
* for controlling the ceiling mirror Pro (No. 7469000000) interface No. 7469000010
is required additionally
5944000000
IR remote control
1-channel, on-wall receiver and sender
* for controlling the ceiling mirror Pro (No. 7469000000) interface No. 7469000010
is required additionally
5699000013
12 V relay box
Plug & play, for lowering the screen when the projector is switched on; connection via the
12 V output of a projector
* not required for ceiling mirror Pro (No. 7469000000) which can be controlled directly
via low-voltage relays of a media control
5944000014
Electronic on/off device
Switches projectors on or off automatically via RS 232 standard control*. For projectors
by KINDERMANN, EPSON, SANYO, MITSUBISHI. Supplied with power supply 5 V DC.
Control via safety switch in ceiling lift Pro and Compact (optional accessory
No. 7466000015)
* If in doubt, please ask us as to compatibility
7465000016