User Manual

6
SET UP
3
Attach the DC output power cord from the driver to the two
connections on the fixture.
Eyelet
Wire hanger
Ratchet hanger
Eyelet
4
Attach one wire hanger to each end of the light fixture
through the metal mounting eyelets found on the top side
of the fixture.
Lower the ratchet hangers to the center of the wire hanger
and connect. Raise the light to the desired position.
For X750 Only. If you plan on mounting the driver romotely, with the
optional 8' DC power cord, skip this step.
The X750 does not use wire hangers. Attach the ratchet hangers
directly to the eyelets