USER MANUAL
WELCOME TO THE FAMILY Thank you for your purchase! We’re committed to providing you with the highest quality grow lights and customer service. If you have any questions or suggestions, our customer service team is ready to help. X750 DRIVER INSTALLATION VIDEO GROW STRONG SUPPORT PH: 1-855-448-4769 WEB: support.growstrongindustries.
TABLE OF CONTENTS OVERVIEW 3 COMPONENTS 4 SET UP 5 POWER CORDS & CABLES 7 BEST PRACTICES 8
OVERVIEW X220 X330 X420 X750 19.75" 33.5" 44.75" 19.75" 44.75" 19.75" SPECIFICATIONS Spectrum Efficacy PPF Max Wattage Input Voltage Lifetime Dimensions Cord Length RMH Warranty Certifications X220 X330 X420 X750 2 Channel 2.55umol/J 561umol/s 220 +/- 5% 120-277V 100,000 Hrs. 19.75" x 19.75" 6' +/- 12" 5 Year FCC, ETL 2 Channel 2.55umol/J 841umol/s 330 +/- 5% 120-277V 100,000 Hrs. 19.75" x 33.5" 6' +/- 12" 5 Year FCC, ETL 2 Channel 2.55umol/J 1071umol/s 420 +/- 5% 120-277V 100,000 Hrs. 19.
COMPONENTS X220 X330 X420 6' 120V POWER CORD (1) X750 4' DC OUTPUT POWER CORD 6" DC OUTPUT POWER CORD WIRE HANGER (REMOTE DRIVER MOUNTING X220, X330, & X420 ONLY) (INSTALLED X220, X330, & X420 ONLY (X220, X330, & X420 ONLY) (1) (1) YO YO RATCHET HANGER RJ-14 DATA CABLE (X750 COMES WITH 4) (LIGHT TO CONTROLLER) (2) (1) (2) DRIVER (INSTALLED X220, X330, & X420 ONLY) (1) 4
SET UP 1 The X220, X330, & X420 X SERIES come fully assembled, ready to grow. Unpackage the fixture and place the light on a safe and stable area directly below the desired hanging location. CAUTION: The LED boards have a conformal coating to resist moisture, but are vulnerable to diode damage if handled improperly. Please make sure LED surfaces are protected from abrasion while handling. 2 For X750 Only. If you plan on mounting the driver romotely, with the optional 8' DC power cord, skip this step.
SET UP 3 For X750 Only. If you plan on mounting the driver romotely, with the optional 8' DC power cord, skip this step. Attach the DC output power cord from the driver to the two connections on the fixture. 4 The X750 does not use wire hangers. Attach the ratchet hangers directly to the eyelets Attach one wire hanger to each end of the light fixture through the metal mounting eyelets found on the top side of the fixture.
POWER CORDS & CABLES POWER CORDS The KIND LED X SERIES X220, X330, & X420 come with a 6', 120 V standard power cord, as well as a 6" (installed) and 3' DC output cord (not included in the X750). An 8' DC output cord for the X750 can be purchased at growstrongindtusties.com. For alternative power cord recommendations, please contact a KIND LED Grow Lights customer service representative to assist in your selection. DRIVER The driver for the KIND LED X SERIES is capable of being mounted remotely.
BEST PRACTICES SPECTRUM ADJUSTMENT The spectrum and intensity of the light can be manually controlled through the rotary dials on the front of the driver. Channel 1 is a targeted full spectrum channel and should always be on. Intensity of this channel will vary for clones, seedlings, and younger plants. Channel 2 contains the IR and UV, as well as some additional deep reds, for an enhanced flowering spectrum.
BEST PRACTICES ENVIRONMENT When using the KIND LED X SERIES, ideal grow room temps should be around 80-85°F. Any lower than this and transpiration can slow, stunting growth. Any hotter than this and heat stress can form. NOTE: High PPFD growing conditions require high levels of attention to detail including proper feeding and CO2 augmentation. For more information, please visit kindledgrowlights.
YOU’RE READY TO GROW STRONG For more information on this fixture and all available options, contact a KIND LED Grow Lights customer service representative at kindledgrowlights.com or call (855) 448-4769. WE WANT TO SEE YOUR GROW! FOLLOW & TAG US ON INSTAGRAM: @kindledgrowlights #kindledgrowlights LEARN MORE ABOUT THIS LIGHT & OTHER PRODUCTS: growstrongindustries.
