LIMO MODELING GENERAL SAFETY RULES fsseseRebesseaessessasEesetaetsae ranee teats ae enter Se ete se Anton senna a nen 1 ADDITIONAL SAFETY RULES FOR OPERATION ers 7 IMPORTANT SAFETY FOR ALL BATTERY PACKS 8 SPECIFIC SAFETY FOR LITHIUM-ION 9 IMPORTANT SAFETY FOR ALL BATTERY CHARGERS 10 COMPONENTS AND SPECIFICATIONS A A 13 SPECIFIC INSTRUCTIONS mms 14 » Battery installation sms 14 o Auxiliary Handle Coachmen, «mmm 15 0 HAND EXTENSION co tus assesses sets assess 16 » Rotary Tiller Operation OPO 16 CHARGING PROCE
LIMO MODELING SAVE THIS INSTRUCTIONAL MANUAL FOR FUTURE REFERENCE. Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
LIMO MODELING = Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Know your product. Know how to start and stop the machine. Be thoroughly familiar with the controls. = Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situation. = Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situation.
LIMO MODELING PERSONAL SAFETY = Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. = Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothing, jewelry, or long hair can be caught in moving parts.
LIMO MODELING = For overhead work, wear safety helmet. POWER TOOL USE AND CARE = Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool. « Maintain the tool with care. Keep the cutting edge sharp and clean for optimal performance and to reduce the risk of injury. Keep the handles dry, clean and free from oil and grease.
LIMO MODELING = Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. . Before making adjustments, changing accessories, or storing the tool, please disconnect the tool from the battery. This will reduce the risk of injury from the power tool. = Check operation of the tool before use. Do not use the tool if the work piece contact mechanism is not working correctly as accidental driving of a fastener may occur.
LIMO MODELING = When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. = Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
LIMO MODELING = Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. = Tool service must only be performed by a qualified repair personnel. ADDITIONAL SAFETY RULES FOR OPERATION * Do not use the unit if switch does not turn it on or off. A unit that cannot be controlled with the switch is dangerous and must be repaired. = Do not carry the tool for place to place while holding the trigger.
LIMO MODELING IMPORTANT SAFETY FOR ALL BATTERY PACKS The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions below and then follow charging procedures outlined. = Do not charge or use the battery pack in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Inserting or removing the battery pack from the charger may ignite the dust or fumes. = NEVER force the battery pack into the charger.
LIMO MODELING WARNING! Shock hazard. Do not allow any liquid to get inside the charger. Electric shock may result. WARNING! Burn hazard. To reduce the risk of injury, charge only LIMO rechargeable battery packs. Other types of batteries may overheat and burst resulting in personal injury and property damage. NOTICE: Under certain conditions, with the charger plugged into the power supply, the charger can be shorted by foreign material.
LIMO MODELING = Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persist, seek medical attention. WARNING! Burn hazard. Battery liquid may be flammable If exposed to spark or flame. IMPORTANT SAFETY FOR ALL BATTERY CHARGERS * DO not attempt to charge the battery pack with any chargers other than the ones in this manual. The charger and battery pack are specifically designed to work together.
LIMO MODELING = When operating a charger outdoors, always provide a dry location and use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. = Do not place any object on top of the charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger In a position away from any heat source.
LIMO MODELING only LIMO rechargeable battery packs. Other types of batteries may overheat and burst resulting in personal CAUTION! Burn hazard. To reduce the risk of injury, charge injury and property damage. NOTICE: Under certain conditions, with the charger plugged into the power supply, the charger can be shorted by foreign material.
LIMO MODELING COMPONENTS AND SPECIFICATIONS 1. Lock-Off Button 6. Handle 2. Switch Trigger 7. Handle Collar 3. Auxiliary Handle 8. Side Cover 4. Handle Knob 9. Tines 5.
LIMO MODELING 1. To install battery pack: Insert battery pack (2) into tool, until an audible click is heard. (Fig.1) 2. To remove battery pack from tool: Release the battery release button (1) and pull battery pack out of tool. NOTE: Always release the ON/OFF Button before insertion or removal of the battery pack.
LIMO MODELING a. Turn the handle knob and draw out the bolt from the auxiliary handle. (Fig.2) b. Insert the auxiliary handle in the machine grip. c. Insert the bolt and handle knob, make sure auxiliary handle is In desired and then tighten the handle knob. Handle Extension Fig.5 Loosen the Handle Collar (2) , extend upper handle to desired length and then tighten the Handle Collar.
LIMO MODELING Rotary Tiller Operation Fig.4 PALLY 0S To start the rotary tiller, please press and hold one of sides of the Lock-off Button((D) and then press the Switch Trigger (2) on the handle simultaneously. WARNING! Release switch trigger, allow tines to come to a complete stop, and then remove battery. Charging Procedure LIMO chargers are designed to charge LIMO battery packs minutes depending on the pack being charged. To charge the battery: 1.
LIMO MODELING 2. Plug the charger into an appropriate outlet after inserting the battery pack. Recharge discharged batteries as soon as possible after use or battery life may be greatly diminished. for longest batch life, do not discharge batteries fully. It is recommended that the batteries be recharged after each use. NOTE: Battery packs for this tool are shipped in a low charge condition to prevent possible problems.
LIMO MODELING Charger Indicator ea ctr [amo tn] Batu Pa | sas IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 1. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 2. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. (2) Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.
LIMO MODELING TROUBLE SHOOTING Problems | Probable Causes | Solutions ® Battery pack not installed |® Check battery pack correctly. installation. Unit will not operate. ® Battery pack not charged. |® Check battery pack charging requirements. ® Battery pack not inserted into the charger properly. ® Insert battery pack into charger and check red LED appears. Battery pack will not charge. Charger not plugged in. Plug charger into a working outlet Surrounding air temperature too hot or too cold.
LIMO MODELING WARNING! To reduce the risk of serious personal injury, MAINTENANCE place the forward/reverse button in the lock-off position or /N\ turn tool off and disconnect battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury Cleaning = Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it with compressed air at low pressure.
LIMO MODELING WARRANTY Every LIMO power tool is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, LIMO will replace any part on an electric power tool that Is defective in material or workmanship for a period of 2 years after the date of purchase unless otherwise noted.
LIMO MODELING EXTENDED WARRANTY REGISTRATION Dear Customer, Thank you very much for choosing LIMO. At LIMO, customer satisfaction is our highest priority. In order to provide the best services, we would like to offer you an extra 6-month limited warranty. Below is the free registration process. To register our extended warranty for your LIMO product, please send your name, your email AND your Amazon order number to Our customer services representative will help you register within 24 hours.
