LIMO MODEL: 7601 MOLOKAI INSTRUCTION MANUAL MODEL 7601 20V Max Brush less Angle Grinder www.kimotool.com If you have questions or comments, contact us at XX t.
LIMO MODEL: 7601 CONTENTS SAVE THESE INSTRUCTIONS! mmm 1 TOOL USE AND CARE rem 2 ADDITIONAL SPECIFIC SAFETY INSTRUCTIONS FOR ANGLE GRINDER SR ER EEA A EES SEES SASS SSR RS 3 COMPONENTS AND SPECIFICATIONS 5 ® SETTING THE DEPTH GAUGE SPINDLE LOCK ~~ corms e o INSTALLING SIDE HANDLE ~~ rem 7 « INSTALLING OR REMOVING WHEEL GUARD INSTALLING OR REMOVING WHEEL ws 3 « BATTERY LED INDICATOR ~~ rem 9 e CHARGER INDICATOR wom 9 + IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 4 « FOR BATTERY CARTRIDGE rm 10 TROUBL
LIMO MODEL: 7601 IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY LIMO TOOL, EMAIL US AT: General Safety Rules For All Tools WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS! WORK AREA = Keep your work area clean and well lit. Cluttered benches and dark areas Invite accidents.
LIMO MODEL: 7601 = Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothing, jewelry, or long hair can be caught in moving parts. Air vents often cover moving parts and should also be avoided. = Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.
LIMO MODEL: 7601 = Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. * Maintain tools with care. Keep cutting tools sharp and clean.Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control. = Check for misalignment or binding of moving parts, break-age of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using.
LIMO MODEL: 7601 = When starting the tool with a new or replacement wheel, hold the tool in a well protected area and let it run for one minute. If the wheel has an undetected crack or flaw, it should burst in less than one minute. If the wire brush has loose wires, they will be detected. Never start the tool with a person in line with the wheel. This includes the operator. = Avoid bouncing the wheel or giving it rough treatment. If this occurs, stop the tool and inspect the wheel for cracks or flaws.
LIMO MODEL: 7601 COMPONENTS AND SPECIFICATIONS 1. Side Handle 4. Slider Switch 2. Spindle Lock 5. Battery Slide Button 3. 20v Max Lithium-Lon Battery SPECIFICATIONS Model 7601 Wheel Diameter mm) Rated Speed/No Load Speed 9000 Revolutions/Minute Rated Battery Voltage 20V Weight (Bare Tool) 39 lbs Weight (Tool + Battery) 5.
LIMO MODEL: 7601 SPECIFIC INSTRUCTIONS SETTING THE DEPTH GAUGE WARNING: Before connecting the tool to a power supply, make sure the slider switch(4) is in the /N\ off position by pressing the rear part of the switch and releasing. Ensure the switch is in the off position as described above after any interruption in power supply to the tool, such as the activation of a ground fault interrupter, throwing of a circuit breaker, accidental unplugging, or power failure.
LIMO MODEL: 7601 INSTALLING SIDE HANDLE /N\ WARNING: = Always make sure that the side handle is installed securely before operation. A.Screw the side handle securely on either side of the tool as shown In the figure. INSTALLING OR REMOVING WHEEL GUARD WARNING: = When using a depressed center grinding wheel / Multi-disc, wire wheel brush, cut-off wheel or diamond wheel, the wheel guard must be fitted on the tool so that the closed side of the guard always points toward the operator.
LIMO MODEL: 7601 1.Wheel Guard 2.Bearing Box 3.Screw INSTALLING OR REMOVING WHEEL WARNING: Always remove battery pack before changing or removing accessories. A. Remove the battery pack. WARNING! Always remove battery pack before changing or removing accessories. B. Properly position the guard. C. Wipe the flange, flange nut and spindle to remove dust and debris. Inspect the parts for damage. Replace if needed. D. Place the flange on spindle, as shown. E.
LIMO MODEL: 7601 BATTERY LED INDICATOR LIMO battery packs include a fuel gauge which consists of four LED lights that indicate the level of charge remaining in the battery pack. The fuel gauge is an indication of approximate levels of charge remaining in the battery pack according to the following indicators: Remaining Capacity Indicator Lights < 20% (OOO) | Red Light Flashing redlining 40%— redavelowlightson 000 Google NOTE: 1.Tap the battery indicator button to see the remaining power 2.
LIMO MODEL: 7601 3.If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 4.If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. 5.Do not short the battery cartridge: (1)Do not touch the terminals with any conductive material.
LIMO MODEL: 7601 TROUBLE SHOOTING Problems Actions 1. Check the battery to ensure that they are fitted properly. 2. Check battery power by the battery indicator light. Recharge the battery if necessary. Appliance not No Power working 3. It can be a sign that the motor is overload and overheat, caused working/pushing too hard. Let the angle grinder cool down itself for about 15 minutes. Any more problems, please contact our customer service directly via The wheel 1.
LIMO MODEL: 7601 WARRANTY Every LIMO power tool is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, LIMO will replace any part on an electric power tool that is defective in material or workmanship for a period of 2 years after the date of purchase unless otherwise noted.
LIMO MODEL: 7601 EXTENDED WARRANTY REGISTRATION Dear Customer, Thank you very much for choosing LIMO. At LIMO, customer satisfaction is our highest priority. In order to provide the best services, we would like to offer you an extra 6-month limited warranty. Below is the free registration process. To register our extended warranty for your LIMO product, please send your name, your email AND your Amazon order number to Our customer services representative will help you register within 24 hours.
