LIMO MODEL: 5003 oT INSTRUCTION MANUAL CJ CJC CO MODEL 5003 CORDLESS ORBITAL POLISHER & BUFFER www.kimotool.
LIMO MODEL: 5003 CONTENTS GENERAL SAFETY RULES memes 1 ADDITIONAL SAFETY RULES FOR OPERATION 7 IMPORTANT SAFETY FOR ALL BATTERY PACKS 8 SPECIFIC SAFETY FOR LITHIUM-ION 9 IMPORTANT SAFETY FOR ALL BATTERY CHARGERS 10 COMPONENTS AND SPECIFICATIONS 13 SPECIFIC INSTRUCTIONS moms 14 * Installing and Removing the Battery Pack from the Tool ~~ 14 e Attaching Bonnet ~~ 15 o Operation Instruction ~~ i 15 Charging Procedure =~ ii 17 TROUBLESHOOTING ~~ 20 VILLEINAGE ooo EE 21 WARRANTY corm os os tos sss mse 22
LIMO MODEL: 5003 SAVE THIS INSTRUCTIONAL MANUAL FOR FUTURE REFERENCE. Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
LIMO MODEL: 5003 Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situation.
LIMO MODEL: 5003 = Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothing, jewelry, or long hair can be caught in moving parts. Air vents often cover moving parts and should also be avoided. = Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
LIMO MODEL: 5003 POWER TOOL USE AND CARE = Know this tool. Read this manual carefully, learn its applications and imitations, as well as the specific potential hazards related to this tool. = Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool. = Use clamps or other practical way to secure and support the work piece to a stable platform.
LIMO MODEL: 5003 Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. Before making adjustments, changing accessories, or storing the tool, please disconnect the tool from the battery. This wil reduce the nsk of injury from the power tool. Maintain the tool with care.
LIMO MODEL: 5003 = Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. = When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. = Under abusive conditions, liquid may be ejected from the battery, avoid contact.
LIMO MODEL: 5003 = Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. = Tool service must only be performed by a qualified repair personnel. ADDITIONAL SAFETY RULES FOR OPERATION = Do not drive fasteners near the edge of the material. The work piece may split causing the fastener to ricochet injuring you or people in the work area. = Do not operate this tool for long periods of time.
LIMO MODEL: 5003 WARNING! If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so may result in serious personal injury. Please contact us for the missing parts. IMPORTANT SAFETY FOR ALL BATTERY PACKS The battery pack is not fully charged out of the carton. Before using the battery pack and charger, read the safety instructions below and then follow charging procedures outlined.
LIMO MODEL: 5003 WARNING! Fire hazard. Never attempt to open the battery pack for any reason. If the battery pack case is cracked or damaged, do not insert into the charger. Do not crush, drop or damage the /\ battery pack. Do not use a battery pack or charger that has received a sharp blow, been dropped, run over or damaged in any way pierced with a nail, hit with a hammer, stepped on). Damaged battery packs should be resumed to the service center for recycling. WARNING! Fire hazard.
LIMO MODEL: 5003 = Contents of opened battery cells may cause respiratory irritation. Provide fresh arr. If symptoms persist, seek medical attention. * [If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.
LIMO MODEL: 5003 When operating a charger outdoors, always provide a dry location and use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. Do not place any object on top of the charger or place the charger on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source. The charger is ventilated through slots in the top and the bottom of the housing.
LIMO MODEL: 5003 NOTICE: Under certain conditions, with the charger plugged into the power supply, the charger can be shorted by foreign material. Foreign materials of a conductive nature, such as, but not limited to, grinding dust, metal chips, steel wool, aluminum foil or any buildup of metallic particles should be kept away from the charger cavities. Always unplug the charger from the power supply when there is no battery pack in the cavity. Unplug the charger before attempting to clean.
LIMO MODEL: 5003 COMPONENTS AND SPECIFICATIONS 1. Battery 6. Wool Buffing Bonnet 2. ON/OFF Switch (for polishing) 3. Speed Dial 7. Microfiber Bonnet 4. Pad (not for use) (for waxing) 5. Handle Model 5003 Voltage 20V Battery Specification Li-ion Battery Charge 120V, 60Hz Charging Time 1 Hour Speed Range 1-6 (RPM) 750/1200/2000/2600/3500/3900 Weight 3.
LIMO MODEL: 5003 SPECIFIC INSTRUCTIONS Installing and Removing the Battery Pack from the Tool & 04 NOTE: For best results, make sure your battery pack is fully charged. NOTE: Operating temperature of this tool is 19 °to 104 °C). Using the tool outside of this temperature range will decrease the life of the tool.
MODEL: 5003 LIMO Attaching Bonnet Fig.1 1. Place a clean bonnet securely on polisher as shown in the image. 2. Put the wool Bonner into foam pad. Tips: Use Synthetic Wool Bonnet for polishing, the microfiber bonnet for waxing.
LIMO MODEL: 5003 1. Wash the car and dry the car before applying polishing or waxing. 2. Make sure that the polisher is off and the speed dial is set to O before applying the polisher. (Fig.3 & Fig.4) 3. Choose the relative bonnet for your job and apply abrasive compound or liquid wax to the bonnet. (Fig.5) 4. Apply compound or wax evenly on the surface to be polished. Dabbing over the entire surface is ideal, too much compound in one area will cause it to fling off the pad.
LIMO MODEL: 5003 5. Be sure the polisher off. Turn speed dial to a low speed ( speed Hold bonnet against surface to be polished, and switch Polisher on. Once the polish has absorbed into the bonnet, the Polisher can be used at a higher speed. 6. To work the polish into the surface, increase the Polisher's speed to higher speed. Hold bonnet flat against surface, and slowly move the bonnet. Overlap each pass halfway, while polishing up and down, then left to right. (Fig.8) 7.
LIMO MODEL: 5003 2. Plug the charger into an appropriate outlet after inserting the battery pack. Recharge discharged batteries as soon as possible after use or battery life may be greatly diminished. for longest batter life, do not discharge batteries fully. It is recommended that the batteries be recharged after each use. NOTE: Battery packs for this tool are shipped in a low charge condition to prevent possible problems.
LIMO MODEL: 5003 /N\ IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 1. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 2. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. (2) Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or rain.
LIMO MODEL: 5003 TROUBLE SHOOTING | Problems Probable Causes Solutions Tool does not tum on (LED lights do not turn on). The internal electronics of the tool have not reset The batter is low or not charged. The battery is damaged. The battery terminals are dirty. Damaged internal electronics. ¢ Remove the battery from the tool, wait 3 seconds and reinsert. o Charge the battery. * Replace the battery. ¢ Clean the battery terminals e Contact us directly for replacement or refund.
LIMO MODEL: 5003 MAINTENANCE are done be sure to remove battery from the tool and empty \ WARNING! Any time inspection, maintenance, and cleaning all fasteners from the magazine. Cleaning = Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it with compressed air at low pressure. = We recommend that you clean the device immediately each time you have finished using it.
LIMO MODEL: 5003 WARRANTY Every LIMO power tool is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, LIMO will replace any part on an electric power tool that Is defective in material or workmanship for a period of 2 years after the date of purchase unless otherwise noted.
LIMO MODEL: 5003 EXTENDED WARRANTY REGISTRATION Dear Customer, Thank you very much for choosing LIMO. At LIMO, customer satisfaction is our highest priority. In order to provide the best services, we would like to offer you an extra 6-month limited warranty. Below is the free registration process. To register our extended warranty for your LIMO product, please send 1. your name, 9. your email AND 3. your Amazon order number to Our customer services representative will help you register within 24 hours.
