LIMO MODEL: 3605W CONTENTS GENERAL SAFETY RULES rrr 1 ADDITIONAL SAFETY RULES FOR OPERATION mms SPECIFIC SAFETY FOR LITHIUM-ION ore: 8 IMPORTANT SAFETY FOR ALL BATTERY CHARGERS even 3 COMPONENTS AND SPECIFICATIONS SPECIFIC INSTRUCTIONS mmm sss 13 * Installing & Removing Battery Pock from the Tool rise 13 o Starting and STOPPING err 14 * PROVOCATIVE) SUCH BOOR summits mass 15 o Attach and Remove SOCKETS rrr beers 16 ® Operation 18 » Difference Between Impact Driver & Impact Wrench recce 19 o Charging COLLOQU
LIMO MODEL: 3605W SAVE THIS INSTRUCTIONAL MANUAL FOR FUTURE REFERENCE. Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
LIMO MODEL: 3605W = Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. « Keep proper footing and balance at all times. Proper footing and balance enable better control of the tool in unexpected situation. ELECTRICAL SAFETY = Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. = The chargers power plug must match the outlet.
LIMO MODEL: 3605W = Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. = Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. = Do not overreach. Keep proper footing and balance at all times.
LIMO MODEL: 3605W = Use clamps or other practical way to secure and support the work piece to a stable platform. Holding the work by hand or against your body Is unstable and may lead to loss of control. = Always have a firm footing and grip on the tool to counteract any force that may be enacted during the operation of the tool. = Practice safe working practices ad ensure all relevant legal requirements are being followed when using this tool. = Never point the tool at the user or others in the work area.
LIMO MODEL: 3605W = Before making adjustments, changing accessories, or storing the tool, please disconnect the tool from the battery. This will reduce the risk of injury from the power tool. = Maintain the tool with care. A properly maintained tool will function more smoothly and prevent binding, making it easier to use. * Check operation of the tool before use. Do not use the tool if the work piece contact mechanism is not working correctly as accidental driving of a fastener may occur.
LIMO MODEL: 3605W = When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. = Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help.
LIMO MODEL: 3605W = Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers. * Tool service must only be performed by a qualified repair personnel. ADDITIONAL SAFETY RULES FOR OPERATION = Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring.
LIMO MODEL: 3605W SPECIFIC SAFETY FOR LITHIUM-ION = Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when lithium ion battery packs are burned. = |f battery contents come into contact with the skin, mimed-iately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases.
LIMO MODEL: 3605W = Do not expose the charger to rain or snow. = Pull by the plug rather than the cord when disconnecting the charger. This will reduce the risk of damage to the electric plug and cord. = Make sure that the cord is located so that it will not be stepped on, tripped over or otherwise subjected to damage or stress. = Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire, electric shock or electrocution.
LIMO MODEL: 3605W = NEVER attempt to connect 2 chargers together. = The charger is designed to operate on standard 120V household electrical power. Do not attempt to use it on any other voltage. This does not apply to the vehicular charger. WARNING! Shock hazard. Do not allow any liquid to get /N\ inside the charger. Electric shock may result. CAUTION! Burn hazard. To reduce the risk of injury, charge only LIMO rechargeable battery packs.
LIMO MODEL: 3605W COMPONENTS AND SPECIFICATIONS 1. Square Driver 4. Battery Slide Button 2. LED Light 5. F/R Switch 3. Trigger 6.
MODEL: 3605W Model: 3605W Fastening Standard bolt M6 M16 (1/4" 5/8") capacities High tensile bolt M10 M14 (3/8" 9/16") No Load Speed (RPM) Square drive 12.7mm Impacts per minute 0 3600 /min Max. Torque in-lbs) Voltage DC 20V Battery Specification Li-ion, 2.0Ah Battery Charge 120V, 60Hz Charging Time 1 Hour Measurement 175770" 185mm | New weight 2.
LIMO MODEL: 3605W SPECIFIC INSTRUCTIONS \ CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or Installing and Removing the Battery Pack from the Tool checking function on the tool. NOTE: For best results, make sure your battery pack is fully charged. NOTE: Operating temperature of this tool is 19 °to 104 °C). Using the tool outside of this temperature range will decrease the life of the tool.
LIMO MODEL: 3605W CAUTION! Always switch off the tool before installing or removing of the battery cartridge. CAUTION! Hold the tool and the battery cartridge firmly when installing or removing battery cartridge. Failure to hold the tool and the battery cartridge firmly may cause them to slip off your hands and result in damage to the tool and battery cartridge and a personal injury. Starting and Stopping To turn ON and OFF the tool, pull and release the trigger switch.
LIMO MODEL: 3605W Reversing Switch Action CAUTION! Always check the direction of rotation before operation. CAUTION! Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. WARNING! When not operating the tool, always set the reversing switch lever to the neutral position. > BP A forward/reverse button determines the direction of the tool and also serves as a lock-off button.
LIMO MODEL: 3605W Attaching and Removing Sockets WARNING! Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. WARNING! Make sure that the impact socket and the mounting portion are not damaged before installing the Impact socket. WARNING! After inserting the impact socket, make sure that it is firmly secured. If it comes out, do not use it.
LIMO MODEL: 3605W To remove the impact socket, simply pull it off. For impact socket with O-ring and pin Move the out of the groove in the impact socket(1) and remove the pin(3) from the impact socket. Fit the impact socket onto the square drive so that the hole in the impact socket is aligned with the hole in the square drive. Insert the pin through the hole in the impact socket and square drive. Then return the O-ring to the original position in the impact socket groove to retain the pin.
LIMO MODEL: 3605W WARNING! Always insert the battery cartridge all the way until it locks in place. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. WARNING! Ensure fastener and/or system will withstand the level of torque generated by the tool. Excessive torque may cause breakage and possible personal injury. A ® Place the socket on the square drive. Keep the tool pointed straight at the fastener. ® Press switch to start operation.
LIMO MODEL: 3605W 3. Bolt: Ensure that all threads are free of rust and other debris to allow proper fastening torque. 4. Material: The type of material and surface finish of the material will affect fastening torque. 5. Fastening Time: Longer fastening time results in increased fastening torque. Using a longer fastening time than recommended could cause the fasteners to be over stressed, stripped, or damaged.
LIMO MODEL: 3605W To charge the battery: 1. Insert/Slide the battery pack into the charger as shown as below. “— 2. Plug the charger into an appropriate outlet after inserting the battery pack. Recharge discharged batteries as soon as possible after use or battery life may be greatly diminished. for longest batch life, do not discharge batteries fully. It is recommended that the batteries be recharged after each use.
LIMO MODEL: 3605W TROUBLE SHOOTING Problems | Probable Causes | Solutions ® Battery pack not installed |® Check battery pack correctly. installation. Unit will not operate. ® Battery pack not charged. |® Check battery pack charging requirements. ® Battery pack not inserted into the charger properly. ® Insert battery pack into charger and check red LED appears. Battery pack will not charge. Charger not plugged in. Plug charger into a working outlet Surrounding air temperature too hot or too cold.
LIMO MODEL: 3605W MAINTENANCE are done be sure to remove battery from the tool and empty \ WARNING! Any time inspection, maintenance, and cleaning all fasteners from the magazine. Cleaning = Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it with compressed air at low pressure. = We recommend that you clean the device immediately each time you have finished using it.
LIMO MODEL: 3605W WARRANTY Every LIMO power tool is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, LIMO will replace any part on an electric power tool that Is defective in material or workmanship for a period of 2 years after the date of purchase unless otherwise noted.
LIMO MODEL: 3605W EXTENDED WARRANTY REGISTRATION Dear Customer, Thank you very much for choosing LIMO. At LIMO, customer satisfaction is our highest priority. In order to provide the best services, we would like to offer you an extra 6-month limited warranty. Below is the free registration process. To register our extended warranty for your LIMO product, please send 1. your name, 9. your email AND 3. your Amazon order number to Our customer services representative will help you register within 24 hours.
