User's Manual

- Downloading Data from TV Link Loader
1. Make sure that it’s connected between PC and TV Link Loader and “Ready-state”.
2. Click [LOADER=>PC] button. The following screen will be opened, and set up
with Default value if you want to change a value.
3. If Downloading is failed. Check Comport and a state of a TV Link Loader.
- Updating Data to TV Link Loader
1. Check Connection (PC–TV Link Loader) and Check “Ready-State”.
2. All data in a PC program(Channel Editor) is loaded to a TV Link Loader.
- Upload/Download Problem
1. The upload/download data is possible when TV Link Loader is “Ready-State”.
2. If upload/download is failed in a “Ready-State”.
Turn off and on TV Link Loader and Retry transferring.
- Save/Read File
1. Click [Save File] button to save data to the file.
2. Click [Read File] button to load data from the file.