User's Manual

STANDBY Mode
4
What is ‘STANDBY’
When power supply enters, is
situation that do not act other thing to
minimize consumption of current.
"Standby" is marked in second line of
LCD.
If get into 'STANDBY' state
Turn on power supply and in case
there is no any manufacturing for 30
seconds, get into 'Standby' state.
Also, get into 'Standby' state to
when there is no any manufacturing
after channel information
transmission or for after click button
20 seconds.
If escape in 'STANDBY' state
Press 'Receive' button, or turn on again while
put out power supply.
TVLink
Standby