Test Report No.
TV Link Loader User’s Manual ⓒ2005 KIMIN Electronics
Attention for Safety 'Attention for Safety' is to prevent accident and danger beforehand using product safety and right. Two or three main point in place that keep necessarily and can see alway Warning * When violated lower part item, serious injury or death can happen. 9 In case this product wet in water, do not put in could apply heat place to dry. Can explode or be responsible for transformation or breakdown. 9 Do not use in place that temperature is high or there is moisture.
Caution * When violated lower part item, slight injury or product damage can happen. ¾ After avoid shock and impact, and extract when nonuse or when is absent power cord, keep in safe place. ¾ Do not drop or strike or shake product extremely. ¾ When wild wind, thunder, lightning strike extremely, control use of product, and unplug together supply cord and charger. ¾ Disjoint product voluntarily, or do not shock.
¾ Contents 1. Intro 2. Each Button Function Explanation 3. To charge, to turn on Power 4. STANDBY Mode 5. Installation Menu Log-in 6. To use Installation Menu 7. Password Substitute 8. Debug Mode 9. Channel Edit Program 10. Electrical standard 11.
1 Intro Function of This Product Thank for buying TV Link Loader. This product has following function. Remote Control Function : Achieve channel and volume Up, Down of general remote control and function of OK button. Channel Information Storage Function : Can do channel information of TV to do storage on TV Link Loader interior. Channel Information Transfer Facility : Can transmit channel information of TV that is stored to TV Link Loader on other TV.
2 Each button function explanation MODE Button Send Button It is when enter by TV INSTALLATION MENU and button that select Up, mode of Down button. It is button to transmit channel information that is stored in TV Link Loader by TV through infrared-ray communication. Receive Button It is button to store channel information of TV by TV Link Loader through RS232 communication. Up Button It is button that act Channel Up of general remote control according to mode, Volume Up role.
3 To charge, to turn on Power If charge Connect 9V DC Adapter in marked position TVLink ReadyÅÆ that is concert. and insert to 220V AC DC 9V Adapter If turn on power supply Connect 9V DC Adapter in marked position that is concert. and insert to 220V AC And that is , do marked place's switch by ON. After power on 9Confirm that phrase called "TV Link" in LCD original idea first line and "Ready" in second line is marked.
4 STANDBY Mode What is ‘STANDBY’ TVLink Standby When power supply enters, is situation that do not act other thing to minimize consumption of current. "Standby" is marked in second line of LCD. If get into 'STANDBY' state Turn on power supply and in case there is no any manufacturing for 30 seconds, get into 'Standby' state. Also, get into 'Standby' state to when there is no any manufacturing after channel information transmission or for after click button 20 seconds.
5 Installation Menu Log-in If come to Installation Menu TVLink ModeIn First, Put TV Link Loader's top portion infrared rays communications department by TV and push MODE button more than 3 seconds. Turn TV Link Loader by TV when Installation menu is marked. Then, Installation menu is appeared automatically. If is not come to Installation menu Confirm whether TV Password and TV Link Loader's Password agree. If Password is same, try again. In case may not be so, inquire to service center.
6 To use Installation Menu Button manufacturing in Installation menu Transfer between menu changes arrow of LCD right side lower column using Mode button establish as '↕'. Locate cursor to menu that want using Up, Down button. Use Mode button again come to menu of do cursor addition if click Up button after establish as '↔'.
6 To use Installation Menu TVLink SendErr Channel information cancel transmission TVLink RcommErr If cancel channel information send-receive When transmit channel information, is canceled if click more Send button once. When cancel, confirm "SendErr" in LCD window. When receive channel information, is canceled if click more Receive button once. When cancel, confirm "RcommErr" in LCD window.
7 Password Substitute If come to Password Mode Put out TV Link Loader's power supply. If turn on TV Link Loader's power supply in state that click ENTER button, is entered by Password Mode. If change Password Up. TLL Dn. TV PassWord 0000 Password Mode In Changing Password If click Up button in Password Mode, can change TV Link Loader's Password if develop into Password of TV convertibly and click Down button. If click selecting, can change number using Up, Down button.
8 Debug Mode Debug Mode Data Format R/W Program Number(2byte) - Program Info(2byt e) = PLL Data (4yte) , ACMS Data (10byte) Ex) R63-24=09A8,dc2503251b20 Basic Rule Basically, transmit 'Hex code' in 'ASCII' form. When is '0x63', '6' and '3' are transmitted in ASCII form. Instruction 1. Read A. R(Cr) : Is instruction that read all Eeprom data. Ex) r(Cr) R00-24=09A8,2503251b20 ： ： R63-24=09A8,2503251b20 (00 ~ 99 to 00 ~ 63 by Hex indication) A. rxxp ,rxp : x,xx = 0~63 Input address in Hex type.
8 Debug Mode 9 UART communication is impossible in Standby mode. 9 Debug mode is not communication with TV but communication with terminal of PC. 9 Standby mode execution condition 9 Do confirmation possibility as "Standby" on LCD screen. 9 Enter by Standby mode after 30 seconds since Power On. 9 If click any button in Stand by mode, get into Ready state. 9 At this point, is entered by Standby mode by automatic after 20 seconds if do not any use.
9 Channel Edit Program - Functions 1. To view/get Channel-Map data of a TV Link Loader. 2. To change/update Channel-Map data of a TV Link Loader. - How to Connect Use a RS232C(PC)-to-stereo (TV Link Loader) Jack for a connection. Stereo Jack(RS232C) PC (using Program) Serial Port(RS232C) - The following screen is Main Screen.
- Downloading Data from TV Link Loader 1. Make sure that it’s connected between PC and TV Link Loader and “Ready-state”. 2. Click [LOADER=>PC] button. The following screen will be opened, and set up with Default value if you want to change a value. 3. If Downloading is failed. Check Comport and a state of a TV Link Loader. - Updating Data to TV Link Loader 1. Check Connection (PC–TV Link Loader) and Check “Ready-State”. 2. All data in a PC program(Channel Editor) is loaded to a TV Link Loader.
- View/Edit Channel Detailed-information 1. You can see following Input screen, when you double-click the [P.no] section. 2. You can edit [Picture Carrier Value] in Editor box or the following [Channel Select Box]. 3. [Channel Select Box] will be opened When You click the [Chg Freq.] Button. 4. The range of Channel Number is 1 ~ 100.
10 Electrical standard 9 Power 9 Adapter Input 9 Adapter Output 9 Battery 9 Use environment condition : AC230V~50Hz(for EU) AC120V~60Hz(for US) : DC9V, 300mA : DC1.
11 Construction < TV Link Loader > < Program CD > < DC 9V Adapter (For EU)> < DC 9V Adapter (For US)> < User’s Manual > < RS232toRJ12 Cable >
