User's Manual

System Installation: Cables Required for RJP-100M

The following cables are included in the cable assembly bundle

USB 2.0 Cable

Typical “Mini-B” male, connect to USB host.

Digital Video Cable

Connect to high definition digital video input on TV display panel.

RGB Computer Cable

15-pin standard PC computer cable of sufficient length to connect inter-

face to TV display panel.

8-Pin RJ-45 Cable (with Yellow Protective Sleeve)

Connects to RJ-45 control input port on TV display panel. Display panel

supplies DC power to operate RJP-100M.

Audio/Video Cables

1-Set of standard composite R-Audio-L / Video cables to connect to TV

display panel’s composite audio/video input jacks.

The following cables are separate

6-Pin RJ-11 Cable

1 cable of sufficient length for connection to room telephone line wall

jack panel.

8-Pin RJ-45 Cable

1 cable of sufficient length to connect to RJ-45 wall LAN network jack,

if available in hotel.

AC Power Cord

Connect to a standard 120V 60Hz AC power outlet.

. . . . . . . .

In order to use the remote jack pack, the TV display panel and the following

cables will need to be connected to both the RJP-100M and resources avail-

able in room.

206-4010

.....

Note: Connector set near mesh sleeving hooks up

to TV display panel.