User's Manual

PHONE
NETWORK
AUDIO IN AUDIO IN VIDEO IN S-VIDEO IN
PC VIDEO IN DIGITAL VIDEO IN USB IN
L
R
10 AMP MAXIMUM CURRENT
P
R
E
S
T
O
S
R
E
S
E
T
Overview
The Remote Jack Pack (RJP) contains circuitry to determine the
presence of a signal at each input jack.
(Note: The initial implementation only monitors the right audio
input of each audio source.)
When a signal is detected, it’s priority is compared to the priori-
ty of other sources which may be present. Control signals from
the RJP to the display panel change state, if the new active
source is of higher priority than the existing source, to direct the
display panel to proper source.
Video and audio are monitored and switched independently.
Power is supplied to the RJP by the display panel via the control
signal cable.
3
206-4010