Manual

26
h. Cock Hammer - one drop in between the
hammer and frame.
i. Assemble gun. Rack the Slide 5-6 times,
dry fire, wipe off excess oil from gun.
j. Make sure, if you have stored the gun with
oil in the barrel and chamber, that you run
a dry patch through the barrel to clear it of
the oil before you fire the gun.
3. Reassemble as previously described.
The key is moderation. Not enough oil and your
gun may not function properly and lead to undo
wear. Too much oil and you risk attracting
damaging dirt and debris to the bearing surfaces
causing undo wear and potential functioning
problems. All metal parts even Stainless Steel
should be lightly lubricated because
RUST IS NEGLECT!
Cloths impregnated with silicone are good for
this purpose.
SPECIAL NOTE: The frame and slide on your
Rimfire Pistol are Aluminium. Take special care
to read all directions of cleaning solvents to
assure it is safe to use onAnodized Aluminium.
4. For long term storage or if you live in a
particularly damp or salty area, a good quality
rust preventative should be used, even on
the Aluminium. We recom mend Shooters
Choice Rust Prevent or equivalent.