Manual

22
or your thumb and turn the barrel bushing
clockwise, towards the right side of the pistol
until the recoil spring plug and recoil spring
are free. Be careful, the recoil spring and plug
are under tension and can fly out with
sustantial force.
2. Ease out recoil spring and plug. If recoil
spring does not come out easily, remove plug
and leave the spring for step 6.
3. Cock the hammer and push the slide rearward
until the semi-circular tab on the back of the
slide stop aligns with the semi-circular
disassembly notch in the bottom of the slide.
4. Push inward on the end of the slide stop shaft
on the right side of the pistol and remove the
slide stop from the left side.
FIGURE 5-DISASSEMBLY OF BARREL
BUSHING AND RECOIL SPRING PLUG
FIGURE 6-REMOVING SLIDE STOP
PUSH
FIRST
THEN:
ROTATE
CLOCKWISE
SEMI-CIRCULAR
DISASSEMBLY NOTCH
ON SLIDE