Manual

21
4. With your finger well clear of the trigger, rotate
Thumb safety downward.
5. Place index finger on trigger, take aim and
gently squeeze rearward until hammer is
released and falls forward striking the firing pin.
Be prepared for loud noise and recoil.
Note: This is a semi-automatic pistol and will
eject the empty cartridge, recock the ham
mer, and chamber a new round. It will con
tinue to fire with each subsequent pull of the
trigger until all rounds in the magazine have
been fired.
6. Continue procedure until magazine is empty
and slide is locked open.
7. If all rounds have not been fired and you wish
to stop shooting, remove the Magazine,
immediately engage slide stop and follow
procedures for unloading previously described.
DISASSEMBLY (FIELD STRIPPING)
This product should be cleaned after every use and
when exposed to dirt, sand, etc. When not in use,
clean at least twice per year.
Perform all safety checks to Clear the pistol
1. With the pistol unloaded, the magazine
removed and the hammer down, depress the
recoil spring plug, with the supplied wrench,