i n H a r m o n y w i t h S c i e n c e af ghjkty y M u s i c Sincey1979 j j
“ K i mber e n j oy s t h e r e p u tat i o n o f h a v i n g the m o st e xten si v e re s earc h s e c t io n o f a ny c o m pany i n the c abl e fi el d….” Karl Lozier Enjoy the Music.
Introduction For over two and a half decades KIMBER KABLE has led the audio/video cable industry in technology and precision manufacturing. Today, we are more committed than ever to producing products of preeminent technical merit and performance. KIMBER KABLE products are created using our own OSCaR™ engineering process. OSCaR™ stands for Objective Subjective Correlation and Results. Through this process we make the estimable and critical link between scientific measurements and listening impressions.
I nt ro du c t i o n to An al o g In terc o n n ec ts M u s i c i n H a r m o n y w i t h S c i e n c e Interconnects are the group of cables which connect individual audio and video devices. Analog interconnects transfer analog waveforms, typically in the audio band of frequencies, between electronic devices. Analog interconnects allow a device such as a CD player to send information to a receiver or for a pre-amp to send information to a power amplifier.
A number of innovative technologies and materials are used in the manufacture of KIMBER KABLE analog interconnects: Sp e c i a l F o rm ul a PE D ie l e c t r ic A special recipe polyethylene dielectric that has carefully selected electrical and mechanical properties for a smooth, sweet and very natural sound. T e f lo n ® D ie l e ct ri c A high pressure, low temperature extruded Teflon® engineered for maximum signal transfer. The low temperature extrusion process prevents conductor surface damage.
Tonik Tonik Analog Interconnect VariStrand™ Ultra-pure copper Proven Tri-braid geometry PE dielectric 4
A Foundation of Musical Accuracy Like the first tone of a scale, the Tonik interconnect provides the foundation of truly accurate performance and value. Through the use of KIMBER KABLE’S legendary tri-braid field geometry, VariStrand™, Ultrapure copper conductors and our special recipe PE dielectric, the Tonik allows music to flow with power, smoothness and harmonic richness. Tonik singleended uses our Ultratike™ RCA type connector. Tonik balanced features Karl Lozier Enjoy the Music.
Timbre Timbre Analog Interconnect VariStrand™ Hyper-pure copper Proven Tri-braid geometry Teflon® dielectric 6
Revealing the Nature of Music. Like the natural distinguishing sound of a musical instrument, so is the performance of the Timbre™ interconnect: distinctly transparent, full bodied and harmonically complete. The KIMBER KABLE hallmarks of three dimensionality and precise image focus are immediately evident. The Timbre™ uses proven tri-braid field geometry and VariStrand™, Hyper-pure copper conductors, along with a clear Teflon® dielectric.
Hero Hero Analog Interconnect VariStrand™ Hyper-pure copper GyroQuadratic™ geometry Teflon®/Dual Teflon® dielectric 8
Designed to surpass your expectations. An analog interconnect based on proven KIMBER KABLE technologies and design goals. Features include our unique GyroQuadratic™ field geometry, VariStrand™, Hyper-pure copper conductors and Dual Teflon® insulating technology. Hero draws you into the music by correctly presenting the harmonic structure and emotion of the actual performance, as well as giving you holographic imaging, detail and bass impact.
Silver Streak Silver Streak Analog Interconnect VariStrand™ Hyper-pure copper/silver Proven Tri-braid geometry Teflon® dielectric 10
Maximum high end value. This analog interconnect incorporates separately insulated silver and copper conductors into the proven tri-braid geometry. The signal is carried via the same Hyper-pure, VariStrand™ silver found in the world renowned KCAG. The ground plane is comprised of Hyper-pure, VariStrand™ copper. This cable offers exceptional speed, clarity and spaciousness at a very reasonable cost.
KCAG KCAG Analog Interconnect VariStrand™ Hyper-pure silver Proven Tri-braid geometry Teflon® dielectric 12
Uncompromising design and performance. KCAG will release hidden sonic capabilities of most systems. Expansive depth and resolution of the most minute details appear from an absolute silent background. Instruments and voices remain tightly focused within a soundscape that defines the boundaries of the original stage itself. KCAG is the ideal interconnect for all upscale music reproduction systems. KCAG single-ended features precision machined WBT® RCA type connectors.
TAK TAK Phono Interconnect TAK Cu VariStrand™ Hyper-pure copper and/or silver OGQ/ 2 ™ geometry Proprietary shielding material 14
When only analog will do. KIMBER KABLE understands that a turntable is an extension of the audiophile’s commitment to musical enjoyment. TAK™ preserves all the precious detail that can be extracted from vinyl. OGQ/2™ (Orthogonal GyroQuadratic/2 channel) braiding virtually eliminates electromagnetic interference, radio frequency interference and crosstalk. Proprietary shielding material drastically reduces low frequency hum.
GQ Mini GQ Mini Multi-Purpose Single-Run Cable CQ Mini Cu VariStrand™ Hyper-pure copper and/or silver OGQ/ 2 ™ geometry Teflon ® dielectric 16
GyroQuadratic Technology Goes Portable Today’s portable audio formats have definitely found their way into the world of traditional hi-fi. To facilitate the connection of an iPod®, MP3 player , satellite radio or even a computer to your home stereo system KIMBER KABLE developed the GQ Mini series of multi-purpose cables. The GQ Mini™ uses the advanced OGQ/2™ geometry (4-wire) braid which keeps the grunge (not the rock and roll type) away and the music powerful. Just connect the 1/8” (3.
I n t ro du c t i o n to Di gi tal /V i deo In terc o nnects M u s i c i n H a r m o n y w i t h S c i e n c e Digital and video interconnect cables call for parameters that are unique when compared to analog audio cables. In digital and video applications, the solutions are geared towards an emphasis in wide frequency bandwidth, low dielectric loss, low parallel capacitance and low series inductance.
Some of the unique features of our digital/video cables are listed below along with brief descriptions of the different formats available. Co axi al C ab le 75 ohm RG59 and RG6 coax cables are designed with an inner ÒhotÓ conductor and an outer shield, separated by an insulating dielectric. Through the use of high quality conductors and dielectrics we have optimized our coaxially configured designs to offer superior digital audio and high definition video performance.
S-Video S-Video Video Interconnect SV-Cu Hyper-pure conducting materials MST geometry 20
coaxially based S-Video cables. Our S-Video series takes full advantage of the Y/C higher resolution format, and offers a surprising improvement in the picture quality received from your VCR, DVD or DBS satellite. Video images are rendered with greater sharpness and clarity, yet become visibly smoother and more relaxing. S-Video is available in two models: SV-Cu containing Hyper-pure copper wire and SV-Ag offering the refined performance of the / finest quality silver.
V-21 V-21 Video Interconnect Pure solid-core copper center conductor Foamed PE dielectric 22
grade” 75 ohm cables. The center conductor is pure solid-core copper and insulated with a foamed PE dielectric. This cable is perfect for multi-room wiring. Termination options include high quality “F,’ BNC and RCA type connectors. Composite, Component, and RGB+HV formats are available. The V-21 is also available unterminated in bulk rolls of 100, 250, and 500 feet. V-21 RGB Component Video Cable Also available as RGB+HV five cable bundle.
DV-30 DV-30 D i g i ta l / Vi de o I n t e r c o n n e c t Pure solid-core copper center conductor Air-articulated Teflon® dielectric 24
and RCA type connectors. Composite, Component, and RGB+HV formats are available. DV-30 is sold in 1/2 meter increments, and is only available factory terminated. “The picture has amazing color saturation and solid images. The (digital) sound has incredible speed with absolutely explosive dynamics, yet is un-fatiguing.” DV-30 RGB Component Video Cable Also available as RGB+HV five cable bundle.
DV-75 DV-75 D i g i ta l / Vi de o I n t e r c o n n e c t Silver-plated conductors Teflon® dielectric 26
allowing the full measure of this technology to shine through. Composite, Component and RGB+HV formats are available. Termination options include “F,’ BNC and RCA type connectors. DV-75 is sold in 1/2 meter increments and is only available factory terminated. “Video details are crystalline in their clarity; edge focus is sharp while at the same time having a film-like smoothness. As a digital cable, the DV75 has that see-through transparency we all hope for along with perfect tonality.
D-60 D-60 D i g i ta l I n t e r c o n n e c t Hyper-pure silver conductor Air-articulated Teflon® dielectric Twin helically wound shields 28
The remaining layers and technology are proprietary. Termination options include BNC and RCA type connectors. Composite, Component and RGB+HV formats are available. D-60 is sold in 1/2 meter increments and is only available factory terminated. “Fast, open and detailed,” raved J-10. “Focused and nuanced,” says WP. “Smooth yet highly detailed, spacious soundstage, and lack of hardness and edge,” says RH.
OPT-1 OPT-1 O p t i c a l D i g i ta l I n t e r c o n n e c t Medical-grade light conducting fiber Warp resistant thermal barrier 30
The fiber is then encapsulated in a thermal barrier that inhibits heat warping of the light-carrying fiber. A mechanical damping outer barrier is also applied to further protect the cable from damage. The ends are then cold-polished helping to further reduce the incidence of reflections.
AGDL AGDL D i g i ta l I n t e r c o n n e c t VariStrand™ Hyper-pure silver Proven Tri-braid geometry Teflon® dielectric 32
The design philosophy is not transmission line based nor does it use metallic or semi-conductive screens. AGDL is available factory terminated with “studio grade” XLR type connectors with silver plated contacts. Also available with the Kimber Ultraplate™ RCA type connector. “KIMBER KABLE AGDL (“The Revealer”): Once again, the name says it all. The AGDL, my preferred digital cable for some time, was the undisputed king of the hill at retrieving information from all of those bits.
Orchid Orchid D i g i ta l I n t e r c o n n e c t Proprietary technology 34
passions of digital devotees and the respect of analog enthusiasts worldwide; both for recording and playback. The Orchid is smooth and detailed with amazing transient attack. Only the finest materials are used in the Orchid’s construction and the technology is proprietary. Orchid is sold in 1/2 metre increments and is only available factory terminated with “studio grade” XLR “…the soundstage immediately became quieter all ‘round, with a blacker, more velvety background.
HDMI™ and DVI™ HDMI™ and DVI™ D i g i ta l M u lt i m e d i a I n t e r fa c e s HD19 Silver-plated larger gauge main conductors Foamed polyethylene conductor dielectric Ferrite noise reduction beads Tri-shield design 36
HD19 High-Definition Multimedia Interface (HDMI™) type cables play a key role in the connection of today’s digital video and audio components. To enhance the performance of HDTV and other high-definition electronics KIMBER KABLE paid special attention to preserving the integrity of these delicate digital signals. Picture quality, in particular, will enjoy vivid image clarity and deep accurate colors. The HD19 has also been optimized to work at greater lengths than was previously thought possible.
B BUS USB™ USB™ Kimber USB™ type Cable Mini BUS Silver-plated (6.
require a reliable transfer of data to operate properly. To address this need KIMBER KABLE created high performance USB™ type cables. Our Mini BUS™ and B BUS™ cables utilize copper conductors with an unusually thick (6.1%) silver plating to enhance conductivity and signal support. The largest gauge conductors possible under USB™ specification are used for both the signal and power conductors.
I n t ro du c t i o n to L o u dsp eak er Cabl es M u s i c i n H a r m o n y w i t h S c i e n c e It was the 4PR that got it all started in 1979. In the mid Ô70s while working as a sound and lighting engineer Ray Kimber became increasingly disturbed by the buzzing, snaps, pops and crackles in the sound system which resulted from the high powered lighting used in conjunction with the audio. He set out to solve the problem by constructing speaker cables that would reject the noise.
Information on some of the unique technologies and materials used in the manufacture of KIMBER KABLE loudspeaker cables is listed below: Sp e c i a l F o rm ul a PE D ie l e c t r ic A special recipe polyethylene dielectric that has carefully selected electrical and mechanical properties for a smooth, sweet and very natural sound. T e f lo n ® D ie l e ct ri c A high pressure, low temperature extruded Teflon® engineered for maximum signal transfer.
4PR Four + four discrete conductors (2 x 14 awg / 2.08mm2] PR Series PR Series Loudspeaker Cables 8PR Eight + eight discrete conductors (2 x 10 awg / 5.27mm2) Special formula PE dielectric.
4pr Setting the standard. In 1979 this classic design put KIMBER KABLE on the map and after improvements over time, is still considered the reference for affordable loudspeaker cables. Millions of feet of this remarkable cable have been sold. The construction consists of four brown and four black conductors that utilize our proven braiding technique. The aggregate wire size is two 14 awg conductors. legendary performer.
4VS Four + four discrete conductors [2 x 13 awg / 2.63mm2] VS Series VS Series Loudspeaker Cables 8VS Special formula PE dielectric VariStrand™ Ultra-pure copper 44 Eight + eight discrete conductors (2 x 9 awg / 6.
4VS High performance, amazing value. Consisting of four gray and four black conductors that utilize our proven braiding technique. The aggregate wire size is two 13 awg conductors. The VariStrand™, Ultra-pure copper conductor used in 4VS shares many similarities with the more advanced TC series cable. 4VS is smooth and refined in the midrange and treble, allowing for hours of fatigue-free performance without “…the bass, which is generally a Kimber strong point: deep and full but always controlled.
4TC Four + four discrete conductors (2 x 13 awg / 2.63mm2) TC Series TC Series Loudspeaker Cables 8TC Teflon® dielectric VariStrand™ Hyper-pure copper 46 Eight + eight discrete conductors (2 x 9 awg / 6.
4TC The high performance standard. Consisting of eight individual TCSS conductors, four blue and four black that utilize our proven braiding technique. The insulating dielectric is high pressure-low temperature-extruded Teflon®. The individual conductors are Hyper-pure copper, arranged in proven VariStrand™ conductor geometry. The aggregate wire size is two 13 awg conductors. The focus, transparency and Richard Black – Hi-Fi Choice Issue 168 8TC Legendary musicality.
4AG Four + four discrete conductors (2 x 14 awg / 2.08mm2] AG Series AG Series Loudspeaker Cables 8AG Eight + eight discrete conductors (2 x 10 awg / 5.
4AG The silver advantage. Four positive and four negative VariStrand™, Hyper-pure silver conductors make up this heavenly cable. The aggregate wire size is two 14 awg conductors. The insulating dielectric is pressure-extruded, virgin Teflon®. The listener will experience an expansive depth of image, with resolution of the most minute details appearing from an absolutely silent background. Images remain tightly focused in their respective individual places. 4AG is 8AG Everything you expect - and more.
Monocle X Monocle-X Loudspeaker Cable WBT® Cu connectors Sixteen discrete conductors [10 awg/5.
What your system is begging for. Monocle-X™ brings an unprecedented price-to-performance ratio to the audio cable world. The level of engineering, technology and beauty that this cable provides are without equal - in particular when considering its price. The transparency and accuracy of Monocle-X™ is presented to the listener in connectors. 24mm diameter “Wide open with see-through transparency, yet possessed of incredible smoothness and no vestige of hardness.
Monocle XL Monocle-XL Loudspeaker Cable WBT® Cu connnectors Twenty-four discrete conductors [8 awg / 8.
Translating science into incredible sound. Monocle-XL™ is a fully optimized cable engineered to offer the most intimate interface of amplifier and single input loudspeaker. Compared to the Monocle-X™, Monocle-XL™ offers increased dynamic range with greater symmetrically inter-woven around the proprietary X38R core compound. All ends are terminated with WBT® connectors.
BiFocal X BiFocal-X Loudspeaker Cable WBT® Cu connectors Eighteen discrete conductors [9 awg / 6.
Unique “bi-wire” technology. BiFocal-X™ is as elegant as it is performance oriented. Designed specifically for “bi-wire” loudspeaker systems, the BiFocal-X™ delivers the clarity and openess sought after by speaker designers and enthusiasts alike. The dual-concentric circuits of the BiFocal-X™ feature a total of eighteen BiFocal-X™ is terminated with WBT® connectors. “…the BiFocal’s strengths…; detail, speed, sharp transients, exceptional reproduction of dynamic and pitch subtleties.
BiFocal XL BiFocal-XL Loudspeaker Cable WBT® Cu connectors Thirty-six discrete conductors [5.
Designed for the finest “bi-wire” loudspeakers. BiFocal-XL™ has impressed consumers and reviewers around the globe. Similar in construction and technology to BiFocal-X™, the BiFocal-XL™ is designed for increased speed, articulation and impact in particular when used with larger loudspeaker systems. BiFocal-XL™ features a total of thirty-six “The Kimbers also offer more headroom, dynamics, air, effortless feeling, palpability and better defined contours.
TriFocal X TriFocal-X Loudspeaker Cable WBT® Cu connectors Twenty-eight discrete conductors [7.5 awg / 9.
“Tri-wired” application of Monocle ™ technology. TriFocal™ cables are a testament to KIMBER KABLE’s manufacturing processes and the unparalleled pursuit of excellence. Comprised of hundreds of individual components per pair of cables the TriFocal-X™ is formatted in a “tri-wire” cables. RF and EMI problems have been identified and solved using proprietary balanced KIMBER KABLE technologies. Your tri-wireable 30mm diameter speakers never had it so good. Supplied with WBT® connectors.
TriFocal XL TriFocal-XL Loudspeaker Cable WBT® Cu connectors Fourty-two discrete conductors [3 awg / 26.
For the full musical expression of your “Tri-wired” loudspeakers. Comprised of hundreds of components per pair of cables, the TriFocal-XL™ is formatted in a seven layer, poly-concentric geometry. Aside from the Model 88 - The Black Pearl™, this is quite possibly the most elaborate loudspeaker cable this cable takes over 50 hours of machine time. TriFocal-XL™ will allow the most intimate union possible between “tri-wire” loudspeakers and an amplifier.
I n t ro du c t i o n to PowerK o rds™ M u s i c i n H a r m o n y w i t h S c i e n c e The notion of power cables offering improved system performance has become a hotly debated topic. The interaction between a power cable and a component has often been misunderstood or dismissed. Research and experience have shown us that this interaction should not be underestimated. A power cord has direct correlation to the musical signal.
Some of the distinguishing features of our PowerKord™ line are highlighted below. Sp e cia ll y O pt im ize d C o pp e r A special recipe copper optimized to support the current demands of AC power. The PK14 series features a 14 x 3 awg wire configuration while the PK10 series features a 10 x 3 awg conductor grouping. Ch r om a Fr e e C on d u c t o r D i e le c t r ic Devoid of detrimental color doping, our dielectric improves the integrity of the AC signal.
PK14 PK Series PK Series PowerKords PK10 Specially optimized copper Chroma free conductor dielectric WATTGATE™ Economy connectors
Release the power of your system. Your audio and video components never had it so good. The PK14 and PK10 feature our specially optimized copper and our chroma free conductor dielectric. In combination with our WATTGATE™ Economy model IEC and wall connectors, these ultra-quiet cables allow for unlimited dynamics, Powerkords “The increase in clarity and dynamics is very noticeable.
PK Gold/Ag Series PK14 GOLD/Ag PK GOLD/Ag Series PowerKords PK10 GOLD/Ag Specially optimized copper Chroma free conductor dielectric WATTGATE™ Audio Grade® connectors 66
Superb AC performance for top class components. The PK14 GOLD™, PK14 Ag™, PK10 GOLD™, and PK10 Ag™ offer the additional advantages of the WATTGATE™ Audio Grade® IEC and wall connectors. These connectors offer the high performance three layer conductive surface plating. An increase of speed in the bass and improved smoothness in the treble is realized with the PK14 GOLD/Ag™ and PK10 GOLD/Ag™ PowerKords™.
Palladian Series PK14 Palladian Palladian Series PowerKords PK10 Palladian SWR enhancement technology WATTGATE™ Audio Grade® connectors 68
Unique technology, undisputed performance. With their unique SWR enhancement technology the Palladian™ PowerKords™ represent the finest power cable available. The critics have been unanimous in their praise of the cable’s transparency, detail, articulate bass, dynamic contrasts, musical ease and flow and freedom from grain. “It’s spooky how much was revealed with the Palladians in the system.
Kwik KWIK12 & 16 K i m b e r Wa l l I n s t a l l K a b l e Unique dual gauge stranding Special reciepe PE dielectric Low friction outer jacket (UL) CL2 rated 70 KWIK 12 KWIK 16
An installer’s delight, a musical dream Today’s higher quality distributed sound and custom home theater installations need no longer be compromised by ordinary “contractor type” speaker cable. Using our OSCaR™(Objective Subjective Correlation and Results) engineering process, KIMBER KABLE has engineered the KWIK™ to be audibly superior to all other custom install speaker cables. Keeping in strand configuration and our special recipe PE dielectric.
Special Products KIMBER KABLE also offers custom built cables for specialty applications. Headphone extensions, portable stereo cables, Y-cables, speaker jumpers, etc., may be available upon special request from your authorized KIMBER KABLE dealer. These specialty cables are available with a variety of connector options. WBT connectors may also be available on certain specialty cables.
Te s t s & M e a s u r e m e n t s Over twenty five years of manufacturing, research and engineering have led KIMBER KABLE to explore in great detail the physical and electrical properties that influence signals and the correlation to sensory quality. Through our OSCaR™ (objective Subjective, Correlation and Results) engineering process KIMBER KABLE has developed many new proprietary procedures for testing, engineering, manufacturing and evaluating cable.
Tonik Analog Interconnects T on i k Ba la nc e d Bas ic E le ctr ical Spe ci ficat ion s B as i c E l e c t r i c a l S p ec i f i c a t i o n s DUT: Tonik 1m terminated with Ultratike™ RCA type connectors. • (Cp) parallel capacitance: • (Ls) series inductance: • (Rdc) dc loop resistance:: • (Xt) total reactance: • Frequency response ±0.5 dB 52.0 pF @ 20 kHz 0.772 µH @ 20 kHz 0.055 Ω 0.098 Ω @ 20 kHz dc Ð 2.8 MHz Ti mbr e M ini mum E l ec tr ica l Spe cif ica t ion s DUT: Timbre 1.
Analog Interconnects Cont. KCA G KCAG Balanced B a si c E l ect r ica l Spe cif ica ti ons B a si c E l ect r ica l Spe cif ica ti ons DUT: KCAG 1m terminated with WBT-0147 RCA type connectors. • (Cp) parallel capacitance: • (Ls) series inductance: • (Rdc) dc loop resistance: • (Xt) total reactance: • Frequency response ±0.5 dB 51.0 pF @ 20 kHz 0.71 µH @ 20 kHz 0.065 Ω 0.
Video Interconnects S Vi deo Cu S V ideo Ag B a si c E l ec tr ica l Spe cif ica t ion s DUT: S Video Cu 1m terminated. • (Cp) parallel capacitance: • (Ls) series inductance: • (Rdc) dc loop resistance: • (Xt) total reactance: • Frequency response ±0.5 dB • Crosstalk @ -30dB V-21 73.50 pF @ 20 kHz 1.08 µH @ 20 kHz 0.254 Ω 0.0068 Ω @ 20 kHz dc Ð 15 MHz 4.0 MHz 62.40 pF @ 20 kHz 0.818 µH @ 20 kHz 0.201 Ω 0.0051 Ω @ 20 kHz dc Ð 20 MHz 6.
4PR Loudspeaker Cables 8PR Ba s i c E l e c t r i c a l S p ec i f i c a t i o n s DUT: 4PR 2.5m bare wire ends. • (Cp) parallel capacitance: • (Ls) series inductance: • (Rdc) dc loop resistance: • (Xt) total reactance: • Frequency response ±0.5 dB B a s ic E le ctr ic a l Sp eci fic a tio ns 312.0 pF @ 20 kHz 0.654 µH @ 20 kHz 0.041 Ω 0.0825 Ω @ 20 kHz dc Ð 100 kHz 4VS 340.0 pF @ 20 kHz 0.596 µH @ 20 kHz 0.041 Ω 0.
“Bi-wire” Loudspeaker cables BiFocal X™ B a si c E l ect r ica l Spe cif ica ti ons BiFocal XL™ B a si c E l ect r ica l Spe cif ica ti ons DUT: BFX 2.5m terminated with WBT-0660-Cu spades. DUT: BFXL 2.5m terminated with WBT-0660-Cu spades.
Music in Harmony with Science
80
®
M u s i c i n H a r m o n y w i t h S c i e n c e Visit our website or contact KIMBER KABLE for more information and nearest dealer. 2752 South 1900 West • Ogden, Utah 84401 phone: 801-621-5530 fax: 801-627-6980 www.kimber.com Products and specifications subject to change without notice.
