Tus neeg siv phau ntawv

NDI Switcher User Manual V1.0

4.2 NDI Output

Create NDI virtual output, realize NDI output by controlling input NDI source or play list, and support single

NDI source input and output with multiple NDI channels.

Click "NDI Output" to enter the NDI output management page. Click "Add Source" to create an NDI output

channel.

5 Panel Control

Click "Panel Control" to create a control panel, configure the NDI input and output, provide cross and IO

panel switching options, support single play and loop play configurations.

Introduction

⚫ NDI Channel Name: Output NDI channel name. Please use different names to create multiple NDI outputs. The

combination of text, numbers and symbols are supported.

⚫ NDI Group：Assign the group of the NDI stream. The public group is the one by default. The group name can be a

combination of English letters, numbers, and special symbols. Supports sending to multiple groups, please use commas

to separate groups

⚫ Smooth Switch：When switching between different sources, to ensure a smoother stream output, it is recommended

to set a switching delay. If the resolution and frame rate of the switched NDI video sources remain the same, the

switching output can be smoother as well.