User Guide
STEP TWO
Set your phone screen brightness to maximum, turn off
auto-lock to prevent your phone going into standby mode
and activate screen lock to keep your screen from rotating.
This guide takes you through the process of
printing a picture and assumes you have already
installed your lm cartridge.
For instructions on how to insert lm cartridges please
refer to your Quick Start Guide.
For a complete User Manual, FAQs, trouble shooting
and care instructions visit www.tomy.com/kiipix
STEP ONE
Fully open the wings on your KiiPix and slide the white
frame from the central cover. The lens will ‘pop-up’ ready to
print your image. Close the wings until you hear them ‘click’
into place. The wings are now ready to sit the frame on top
in step 3.
STEP FOUR
Use the reective mirror to ensure photo is aligned correctly
and the screen is still on. Press the shutter button making
sure it is pressed down fully before releasing.
STEP FIVE
As soon as you release the shutter, continually turn the print
dial in a clockwise direction until the lm is released. It is not
necessary to remove the KiiPix frame and your phone from
the wings before turning the dial.
STEP THREE
Place the KiiPix frame on your phone and then place on
top of the KiiPix making sure to align the double and single
locating lugs on the frame and KiiPix wings. If this is the
rst time you are using the frame, remember to remove the
plastic protectors on the anti-slip strips.
TIPS:
• Put your phone into ‘airplane’ mode to prevent
interruptions.
• If your image is printing too dark try increasing the
brightness of the image in in photo settings.
• Make sure that the background light is not too strong or
too dark (normal room light is perfect). Strong outdoor
sunlight or a dark room will affect the picture quality.
• Change Auto-Lock /Sleep to 5 minutes.
• Turn off Auto-Brightness /Automatic brightness.
TIPS:
• A person icon is printed on the white frame to show you
what way round your image will print.
• The white frame has two hooks on one end and a single
wider hook on the other. These align with the locating
lugs on the wings. When the frame is in the correct
position it will ‘lock’ in place to stop the frame moving.
TIPS:
• Hold the phone on the frame to prevent movement
when you press the shutter.
• Use the KiiPix when it is placed on a solid surface for
best results.
TOP FILM TIPS
• You can store lm in the fridge for longevity. Just
remember to take it out 12 hours before using it so the
lm can reach room temperatire again.
• Do not put any pressure or press on the lm as this will
damage it.
• Do not shake the lm.
PRINTING YOUR PICTURE
IN JUST 5 STEPS